[loki954]

your file is bad it should be 1k not 515b

[Foxsitto]

I need IMMO OFF for Peugeot 406 diesel  EDC15C2 single plug.

I read 95P08 chip.

Foto or nr ecu. Thanks.

hi, finally added the photo of the real ECU in the post.

Thanks

You have to read flash 29F400 in EDC15C2 single plug. Or am I thinking wrong? Thanks.

[Abou-raffik]

HI BRO
dont touch e2p write this attached flash and 

click thank+reput cost no

[loki954]

he have to post the eeprom   immo is there

[snyper]

I need IMMO OFF for Peugeot 406 diesel  EDC15C2 single plug.

I read 95P08 chip.

Foto or nr ecu. Thanks.

This solution worked very well. Car started first time.

Thanks mate, your solution is good.

---

HI BRO
dont touch e2p write this attached flash and 

click thank+reput cost no

Thanks mate, but the car already left. I wrote the eprom file provided by TOUFIK40.

---

your file is bad it should be 1k not 515b

Thanks, I read it with TL8....

---

Thanks to all for the helping spirit you exibited, the solution which worked for me is the one on post #4 above provided by TOUFIK40.

Despite having problems with my programmer writing the file to the ST... chip, with some errors, the car started right away.

Thanks all