[eobdexpression]

Hi to all lords, place the file for the request of the rev limiter on a opel astra gtc 1.9 150 cv with bosch edc16c9 electronics so someone knows how that bit is to be modified (eg i would like to reach 5000 rpm) to do it The hurd cut at 5000 rpm? I would like to thank all those who will help me make good.

[robertop]

Your file.
Push on reputation!
Thanks!

[eobdexpression]

Your file.
Push on reputation!
Thanks!

My friend, thank you so much for the interest ..... But are you sure that works so? Because I know for bosch edc16 there is only one bit that needs to be changed to the number of revolutions in which you want the rev limiter and not as a torque limiter.

[robertop]

Test and tell me

[eobdexpression]

Test and tell me

My friend I tested but nothing to do unfortunately for how I imagined and told you but thank you for the help you gave me so if you know any other solution I can be happy to try it out and see if it succeeds

[banza]

If you wnat to try, its not tested, try as your own responsability

[onejay09]

HI Ive Added a winols project with the required maps for hardcut, Ive also Added the Hardcut Limiter.
ive got the same car

[eobdexpression]

If you wnat to try, its not tested, try as your own responsability

I'll let you know if it works thanks

---

HI Ive Added a winols project with the required maps for hardcut, Ive also Added the Hardcut Limiter.
ive got the same car

I'll let you know if it works thanks