[alex09]

Hello everybody, i am having problems with passat b6 2007 2.0 tdi siemens ppd1.2 BMR 125kw, car starts than stop after 2sec. Glow plug light flashes. Fault codes only in engine ECU P1570 engine start blocked by immobiliser. Also when i put the key in ignition there is no sound for lock release, just ignition on. And in adress 25 Immobiliser in MVB 081 and 082 there is no Immo ID and no VIN number all xxxxxxxxx. In CCM MVB 011 also releated to Immobiliser three columns all No Value. There is no fault codes in Immobiliser, no fault codes in CCM just in engine ECU. If someone has some more experience with this? Please help. I am adding some pictires from VCDS

[elektronik13]

Check the transponder in the key
Synchronization none, immo ecu

[slawcio26]

Hello did you try key learning?
What is the error memory?
Try Stg25 (immo) channel blocks 00 and confirm positively.

[elektronik13]

Hello did you try key learning?
What is the error memory?
Try Stg25 (immo) channel blocks 00 and confirm positively.

This is immo 4

[alex09]

Check the transponder in the key
Synchronization none, immo ecu

Allready try that, i ve got 2 keys, both of them same. Have try with changing ccm from another car with 95320 read and copy, and swap same thing. If it is edc16 i would do immo of and solve problem, this is siemens no immo off. Colud the ESCL be the problem. I try bypass red yelow(small) cable to brown black, still same. I too have pin code, CS, MAC, but it refuses to accept when i try in security accsess. And confused about immobiliser status ( 0 ). What does it means. And also in CCM no value for immobiliser.

[ROD-BENDERS]

Check the transponder in the key
Synchronization none, immo ecu

Allready try that, i ve got 2 keys, both of them same. Have try with changing ccm from another car with 95320 read and copy, and swap same thing. If it is edc16 i would do immo of and solve problem, this is siemens no immo off. Colud the ESCL be the problem. I try bypass red yelow(small) cable to brown black, still same. I too have pin code, CS, MAC, but it refuses to accept when i try in security accsess. And confused about immobiliser status ( 0 ). What does it means. And also in CCM no value for immobiliser.

Could it be possible that higher grade vcds is required my friend

[alex09]

Check the transponder in the key
Synchronization none, immo ecu

Allready try that, i ve got 2 keys, both of them same. Have try with changing ccm from another car with 95320 read and copy, and swap same thing. If it is edc16 i would do immo of and solve problem, this is siemens no immo off. Colud the ESCL be the problem. I try bypass red yelow(small) cable to brown black, still same. I too have pin code, CS, MAC, but it refuses to accept when i try in security accsess. And confused about immobiliser status ( 0 ). What does it means. And also in CCM no value for immobiliser.

Could it be possible that higher grade vcds is required my friend
[/
What do you mean by that, i need to update my vcds. Could somebody check dumps from ecu and ccm are they good. and do they match. ill post dumps.

eeprom ECU siemens ppd1.2.rar
File Type:
Downloaded:	19 times
Size:	1.2 KB

---

[quote='elektronik13' pid='243312' dateline='1493665728']
Check the transponder in the key
Synchronization none, immo ecu

Allready try that, i ve got 2 keys, both of them same. Have try with changing ccm from another car with 95320 read and copy, and swap same thing. If it is edc16 i would do immo of and solve problem, this is siemens no immo off. Colud the ESCL be the problem. I try bypass red yelow(small) cable to brown black, still same. I too have pin code, CS, MAC, but it refuses to accept when i try in security accsess. And confused about immobiliser status ( 0 ). What does it means. And also in CCM no value for immobiliser.

Could it be possible that higher grade vcds is required my friend

You mean that i need newer vcds or what, i will post dumps from ecu and ccm if someone can check them to see if they match.

---

Having troubel replying the post dont know why. Ive post dumps from ecu and ccm if someone can check them, if they match. Buzzard do you mean that i need newer vcds?

---

Check the transponder in the key
Synchronization none, immo ecu

Allready try that, i ve got 2 keys, both of them same. Have try with changing ccm from another car with 95320 read and copy, and swap same thing. If it is edc16 i would do immo of and solve problem, this is siemens no immo off. Colud the ESCL be the problem. I try bypass red yelow(small) cable to brown black, still same. I too have pin code, CS, MAC, but it refuses to accept when i try in security accsess. And confused about immobiliser status ( 0 ). What does it means. And also in CCM no value for immobiliser.

Could it be possible that higher grade vcds is required my friend

Having trouble answering post dont know why?

---

Why i cant answer the post? Something is wrong.

---

Why i cant reply? Does someone blocked me?

[alex09]

What is wrong, cant answer posts? Now its ok. If someone can check these dumps if they are ok? Buzzard what do you mean by that?

[elektronik13]

What is wrong, cant answer posts? Now its ok. If someone can check these dumps if they are ok? Buzzard what do you mean by that?

CCM IS
VIN: WVWZZZ3CZ7E216597
PIN: 55536
CSB: 89 BF 35 7D 13 7E 6A
Program KEY to ccm

[alex09]

What is wrong, cant answer posts? Now its ok. If someone can check these dumps if they are ok? Buzzard what do you mean by that?

CCM IS
VIN: WVWZZZ3CZ7E216597
PIN: 55536
CSB: 89 BF 35 7D 13 7E 6A
Program KEY to ccm

Thanks Elektronik13, it does not accept pin code when i try to addapt keys. Says wrong key or something. Invalid refuses key. No way to addapt. Not even with abrites. A friend of mine has abrites we try everything. Without success. And i allready have pin CS MAC. Exept when reading CCM immo id is diferent than you gave me now. It is WVWZZZ3CZ6E169.