[BoNzO]

T5 id12 is from glass yes?

[raffy haddad]

Any t5 can be done 11 12 13 and 33
No matter put t5 and select with zedbull manual programming
T5 temic 12 and put data and press write

[sv2hqx]

Nice raffy but he need to read correct
if he cant read correct also he cant write correct

[BoNzO]

I will read after i write...

[raffy haddad]

Hi
Waiting his report
Hope everything goes well with him
Good luck

Bonzo please pay attention on prpgrammer adapter
And pin 1
As photo of xprog you post the eeprom not clear but i guess it is wrong
I guess your reading pin 1 not in place
Don't rush take your time because this kind of wprk
Must be done quitly and in relaxing way

And if you can read original dump in correct way and save it before write the new file

[BoNzO]

Hi
Waiting his report
Hope everything goes well with him
Good luck

Bonzo please pay attention on prpgrammer adapter
And pin 1
As photo of xprog you post the eeprom not clear but i guess it is wrong
I guess your reading pin 1 not in place
Don't rush take your time because this kind of wprk
Must be done quitly and in relaxing way

And if you can read original dump in correct way and save it before write the new file

i have read with minipro ,upa and xprog same result ,now i have tryed with carprog ,same result ....if i put pin 1 on pin 8 i have error....i will post result next week after i purchase a t5 blank....when i hit read on zedbull on my original key it wont detect transponder...so i think that the transponder is faulty in the key...

[raffy haddad]

With mini pro read it as 24c01a
And try to make transponder to the old transponder if you have the old key
On xprog desolder the eeprom turn your adapter and make match the draw at adapter
To the draw on xprog
Take a good look to the picture
Some times zedbull have faulty antenna or need couple of times to read
Do you have another reader ?
Regards

---

Hi bonzo
A question when you turn ignition on before
Does the dashboard turn on lights

[BoNzO]

I dont know because the motorcycle is not in my town ,i know that the zedbull china is a crap...i appreciate your help

[sv2hqx]

Did you read eprom after you write it??
Its same as raffy file?
Start with correct procedure to have a good file from eprom
May zed clone is cheap but t5 is easy

[BoNzO]

Yes ,i have compared with hexcmp ,its the same and zedbull recognize it...