Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Free Installation: Map Audi MMI 3G HDD 2014 PART. NO. 8R0060884BK version 6.17.3
25-02-2014, 05:43 AM,
Post: #14
|
|||
|
|||
RE: Free Installation: Map Audi MMI 3G HDD 2014 PART. NO. 8R0060884BK version 6.17.3
The procedure is as follows :
2013 Audi MMI 3G HDD UPDATE These updates apply MMI 3G HDD and Joystick great! If you have aftermarket interface ( AMI, Dension ) , unplug them before upgrading. Because there were cases of inattention, repeat the warning: ! Do not ever click Start Bootloader ! IMPORTANT ! Updating should be done with the engine running and no power consumption , otherwise there is a risk of battery quickly so dark when night lights , no power windows or sunroof open without heated seats etc. . Moreover , such a warning to consumers not to be current will appear simultaneously on the screen to start the installation. There is still a danger if positions remain on , or light board . January . Detailed upgrade procedure (please do CD1 , CD2 , CD3 ) - Start the engine , turn the ignition other consumers and not updating - Put the CD in 2xSD card update CD / DVD - Press any key and then configure CAR - Then press Setup and press RETURN. Keep it pressed for 5-7 seconds and update menu will appear (Software Update) - Press the update button ( lower right corner ) . - Select CD / DVD as source Download Server - There will be a version of the software , press the center - Select Standard - You will see a list of updates available on the CD and at the end of the list by clicking the "Start Download" . Confirm and then again "Start" - Provides a system restart and then start to update - In accordance with the options available on the car that will be updated in May said at the end of the installation it will show something like : 5 OK , 0 NOK (not OK) 0 N / A (not applicable ) . If options appear to NOK check " Try Again" . - To appear in the end " device description " - from the list of modules and their status updated OK . - Click "Continue" - Press " Pause documentary " - The unit will restart. . To repeat the procedure for updating the maps updated in 1 SD card with maps using the SD1 slot card. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
26 Guest(s)
26 Guest(s)
Return to TopReturn to Content