[Arrixes]

The only error that remains after update nav and activation is

VCDs Version: Release 11.11.3
...
1 Fault Found

03175 - Invalid Data Set
.
Freeze Frame
Voltage: 14.70 V
Note: This error does not affect the functionality MMI's. It seems that it can be eliminated only representative.
It seems that two errors can result due to the update:
03276 - Please Check Software Version Management
03175 - Invalid Dataset
Cristi still believe a VAS parameter would solve your troubles.
I'm trying to enlighten me why and how.
First solving seems to be this: h**p://w**.audienthusiasts.c*m/Appli..._SVMError.html

---

I successfully updated MMI 3G with hard disk, it is not necessary to go green menu hide or delete the old map , I followed this step :

Update the firmware to version 257, CD p / n 8R0 906 961 DF
One . Insert the CD to update firmware or SD card with all file copied from the CD to the root book
Two . Press SETUP + RETURN FPR 5 seconds
Three . Click UPDATE
April . start update
May . Exit when finished (about 50 min)

Update to version 6.17.3 map
One . Load latest map SD
Two . Press SETUP + RETURN
Three . start update
April . When the output finish ( about 2 hours)

activation map
One . Insert the SD card activator 2014
Two . Press SETUP + RETURN
Three . Select " Enable MAP 2014 "
April . Exit when finished ( about 3 min)

It is important to start the firmware update , if you install the map update before and after the firmware update , you must repeat the procedure for updating map another time to update another file , which are only compatible for the new firmware version 257 .

The last step is to remove the error code 03276 - Please check the software version households with XOR procedure usually 5F adaptation channel 10 .h**p://w**.audienthusiasts.c*m/Appli..._SVMError.html
After the update will be enabled in the MMI Hidden Menu Navi Plus (3G): (only for car navigation equipped)

[5F - Information Electr.]
[Adaptation - 10] -> Channel 6 -> Change 0-1

Hi ...
I am Arrixes from Malaysia
I’ve got an Audi Q7 Quatro-2010 UK Specs.
Can i use all the downloads to Change/Upgrade my MMI EU Nav. into Asia Navigator/Map. If not how do i change or upgrade the Map Navigation from Europe/UK Map Nav. to Asian/East Asia Map Navigation.
My Audi MMI Specs as below :
Software Version : HNav_EU_K0031_3_D1
Nav. Database Version : 8R0060884R ECE5.11.7
Appreciate if you could help me out
TQ