[adel.nooh]

Try again

It works
With the key without transponder.
Remote also return to live
Thank you very much.

''Immibolizer Active'' and ''SAFE'' still appear in the screen.
Is there away to hide them ?

[bram380]

Immobilizer acvtive & safe mode because no valid key.

Try this file:

[raffy haddad]

Hi thanks for all members that helped adel
For finishing his problem
Hope to hear from him step by step how he solved
Regards

[adel.nooh]

Hi thanks for all members that helped adel
For finishing his problem
Hope to hear from him step by step how he solved
Regards

First i tried to program the key by fvdi 2014 v21 from fvdiobd
But it give me only login code and first 6 bytes of cs.

Then i use carprog clone
I take off dashboard, read 24c32 EEPROM, put in service mode by change some bits to FF then i use carprog to read the dashboard.
I success to read cs code, login code, immo data, vin and i can change odometer km.
With carprog via obd i can read write 24c32 easily.

After that i return to fvdi to program the key, the operation is done but the key never work.
I read 24c32 by carprog and i didnt realize any change to immo data (same key count . Same key ids)
I think ''Immobilizer Active'' and ''SAFE'' reading in the dashboard makes block to any new programming.

Finally i decide to make immo of
I try to read med9.1 engine ecu by fvdi but it fails, i heard that this ecu need to be kept in power on 20 minutes before able to read.
I kept it 1.5 hours power on try every 10 minutes to read it with no success.
I take off the med9.1 ecu which exist in the hood below window's blades, read 95160 EEPROM, send to this forum and guys help me to make immo off, write and it works, also remote return to live.

What i need to learn is how to make the immo off ? By software or other way ?

---

24c32 can be read/write in circuit but 95160 must be desoldered completely then read or write (95160 cant be erased, just write to it and it works)

[raffy haddad]

Hello what version carprog you work with?

[adel.nooh]

Hello what version carprog you work with?

My friend told me it is version 7

[raffy haddad]

Hi i don't have carprog and i am thinking of getting one
But from what i read that it is not good on mileage (also i await who own this tool for comment )
And as for your ex problem
Did you change km with carprog ?
If yes do you think that km adjustement cause all that trouble with this car ?
Regards

[adel.nooh]

Hi i don't have carprog and i am thinking of getting one
But from what i read that it is not good on mileage (also i await who own this tool for comment )
And as for your ex problem
Did you change km with carprog ?
If yes do you think that km adjustement cause all that trouble with this car ?
Regards

With clone carprog i able to get cs code and change km value by obd and also by connecting wires to dashboard.
The clone carprog is missing alot of options than the original one especially with mcu works.
Km value is not a problem, i just mention it.
I think the main problem is in the ignition lock need to be changed or fixed as the key is broken inside by the owner of the car and he success to pull it from inside.
I didnt try to take it out so i am not sure of that but someone with the same symptoms change the ignition switch and it works.

[jansmerfowski]

Hi adel.nooh. Which versions of fvdi did you buy?
With usb dongle?

[adel.nooh]

Hi adel.nooh. Which versions of fvdi did you buy?
With usb dongle?

I bought fvdi 2014 which has vag v21 from fvdiobd
I was thinking of fvdi 2016 with vag v24 but for the following reasons i prefer the old one -
bcm2 must use v21 and brand new key
v24 not work with bcm2

To program keycard to renault scenic 11 2008 reg, had to use 5.4 version but programmed fine. 6.2 would not work.