Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ICOM A1 & A2 & NEXT Quality (NEW PCB PICTURES!)
10-02-2014, 20:28 PM, (This post was last modified: 13-09-2017, 18:10 PM by JarsaR.)
Post: #1
ICOM A1 & A2 & NEXT Quality (NEW PCB PICTURES!)
Hey,

i have been scrolling the internet few weeks now,
looking for high quality Icom A2 (B+C). I would like to have the wifi model,
Has anybody some good source for them? I am new to BMW diagnostic overall, so any help will be greatly appreciated. smile
Im thinking of spending 600$ is that enough to get HQ one?

Thanks,

-JarsaR.
Quote this message in a reply
[+] 2 users say Thank You to JarsaR for this post
10-02-2014, 21:14 PM,
Post: #2
XZBMW  RE: HQ ICOM A2?
(10-02-2014, 20:28 PM)JarsaR Wrote:  Hey,

i have been scrolling the internet few weeks now,
looking for high quality Icom A2 (B+C). I would like to have the wifi model,
Has anybody some good source for them? I am new to BMW diagnostic overall, so any help will be greatly appreciated. smile
Im thinking of spending 600$ is that enough to get HQ one?

Thanks,

-JarsaR.

Just FYI, chinese clones for USD600 will do not have Wifi card inside, for sure! hiddentmi

You'll be lucky one if you got unit with installed passive cooler plate and with soldered mini PCI header for wifi card. happy

Also for that price you probably can't afford newer versions of ISTA D/P on native preinstalled HDD for Dell or Lenovo. callme

But it is just my five cents,

Regards! enjoy
Quote this message in a reply
[+] 2 users say Thank You to baner for this post
11-02-2014, 06:05 AM, (This post was last modified: 10-03-2014, 16:51 PM by volavka.)
Post: #3
RE: HQ ICOM A2?
(10-02-2014, 21:14 PM)baner Wrote:  Just FYI, chinese clones for USD600 will do not have Wifi card inside, for sure! hiddentmi

You'll be lucky one if you got unit with installed passive cooler plate and with soldered mini PCI header for wifi card. happy

Also for that price you probably can't afford newer versions of ISTA D/P on native preinstalled HDD for Dell or Lenovo. callme

But it is just my five cents,

Regards! enjoy

Ok,

So how many cash are we looking, if i get the wifi, and where to seek..?
I think im going to try Rheingold native, with the help of the forum of course. nerd

Edit. I have done more searching, and i think i found supplier for HQ icom,
Almost 1000Usd. Well, maybe they also start coming down near future.
smirk
Quote this message in a reply
04-03-2014, 19:45 PM,
Post: #4
RE: ICOM A2 Quality (PCB PICTURES!)
Opened up Icom A2 today, must say not too impressed for 950$. sweating
How does it look to professionals? Should there be aluminium heat sink?
And what about the big slot seen in pictures? Any info is helpful. drive


Attached Files Thumbnail(s)
           
Quote this message in a reply
[+] 4 users say Thank You to JarsaR for this post
08-03-2014, 02:16 AM,
Post: #5
RE: ICOM A2 Quality (PCB PICTURES!)
(04-03-2014, 19:45 PM)JarsaR Wrote:  Opened up Icom A2 today, must say not too impressed for 950$. sweating
How does it look to professionals? Should there be aluminium heat sink?
And what about the big slot seen in pictures? Any info is helpful. drive

Hmmm, as I told you before, this is NOT HQ CLONE, and its not worth 950 USD. worried

That slot is for MINI PCI WIFI card (IN HQ clone it will be filled with wifi Atheros Wifi Card). talking

And you dont have any cooling pads attached to main MCU, so you DONT HAVE ANY COOLING, it's not good at all. sweating

BTW for wifi support you must reflash your clone A2 with proper firmware,
most of chinese clones have "shorted" version of firmware (from old ICOM A versions) without support for wifi. worried

Regards! enjoy
Quote this message in a reply
[+] 8 users say Thank You to baner for this post
08-03-2014, 16:06 PM, (This post was last modified: 10-03-2014, 16:52 PM by volavka.)
Post: #6
RE: ICOM A2 Quality (PCB PICTURES!)
(08-03-2014, 02:16 AM)baner Wrote:  Hmmm, as I told you before, this is NOT HQ CLONE, and its not worth 950 USD. worried

That slot is for MINI PCI WIFI card (IN HQ clone it will be filled with wifi Atheros Wifi Card). talking

And you dont have any cooling pads attached to main MCU, so you DONT HAVE ANY COOLING, it's not good at all. sweating

BTW for wifi support you must reflash your clone A2 with proper firmware,
most of chinese clones have "shorted" version of firmware (from old ICOM A versions) without support for wifi. worried

Regards! enjoy

Thanks,

Happen to have picture of the cooling pads and how they are installed?emo
Im not too worried about the wifi, maybe ill get card later and try it out. nod I already flashed the newest firmware (3.10.44), that went smooth.
It is frustrating, that the sellers dont know shiat about what theyre selling. I buyed that from Ecutool company, I luckily still have buyers protection from Aliexpress many days left, maybe ill ask Ecutool to refund me few dollars. rofl
Quote this message in a reply
[+] 2 users say Thank You to JarsaR for this post
15-03-2014, 19:45 PM, (This post was last modified: 09-05-2014, 16:28 PM by volavka.)
Post: #7
RE: ICOM A2 Quality (PCB PICTURES!)
Here is the new aluminium heatsink, Milled from the place, where processor contacts the aluminium, and between them is a layer of heat dissipating zinc paste.

[Image: 352gs50.jpg]

Snug fit, to help heat radiate to aluminium shell.

[Image: 2wdx8hw.jpg]

Should stabilize the temperature now while programming.
Quote this message in a reply
[+] 12 users say Thank You to JarsaR for this post
05-05-2014, 21:18 PM,
Post: #8
RE: ICOM A2 Quality (PCB PICTURES!)
When I read this, I have the feeling it is more luck to get a HQ clone.
Think about to buy me a ICOM A2, maybe i will order the cheapest that i can found. Better not invest a lot of money and still get only the same simple clone as I would spend significantly more.

Anyone knows the "new" ICOM A3, the currently are offered by some Chinese sellers?
Looks to me after a stripped A2.
Quote this message in a reply
06-05-2014, 10:46 AM,
Post: #9
RE: ICOM A2 Quality (PCB PICTURES!)
(05-05-2014, 21:18 PM)Hippe Wrote:  When I read this, I have the feeling it is more luck to get a HQ clone.
Think about to buy me a ICOM A2, maybe i will order the cheapest that i can found. Better not invest a lot of money and still get only the same simple clone as I would spend significantly more.

Anyone knows the "new" ICOM A3, the currently are offered by some Chinese sellers?
Looks to me after a stripped A2.


I Think the main reason for icom A3 From china , is that they claim it can resume programming where left off during interruption. NOT Quality.

Smetimes from china, you buy icom A2 But really you get icom A1 in A2 Box, ithink this will be the same with A3 you will get A1 in many many cases.

when buying from china, RESEACH is the MAIN thing, NOT TO RUSH AND BUY.
Quote this message in a reply
[+] 4 users say Thank You to TizWoz for this post
06-05-2014, 14:12 PM,
Post: #10
RE: ICOM A2 Quality (PCB PICTURES!)
^^^That is why I buy A1 still-it is cheap and I know it works.
Quote this message in a reply
[+] 6 users say Thank You to bawareca for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 102 34,729 Yesterday, 05:59 AM
Last Post: hashtagmaster
XZBMW Poor wifi signal from new ICOM's bmchicago 1 127 26-03-2024, 03:04 AM
Last Post: rocdeng
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 3,885 24-03-2024, 11:29 AM
Last Post: Twointje
  TESTO tool with ICOM Rolzs 5 312 17-03-2024, 20:23 PM
Last Post: Vojno
  Request xHP 6HP decrypted files and icom flasher tste1982 10 823 05-03-2024, 22:47 PM
Last Post: bradsm87
XZBMW ICOM Firmware (NEXT & A2) always current! Vojno 203 41,897 16-02-2024, 19:32 PM
Last Post: Vojno
XZBMW BMW_ISPI_ICOM-FW_03-23-22 & ICOM-Next-FW_04-23-22 shawnsheridan 22 2,363 05-02-2024, 23:47 PM
Last Post: vagrom
  Connect to MGU via SSH and ICOM anton.maier 1 322 02-02-2024, 04:46 AM
Last Post: VroomVroom
XZBMW how to connect icom remotely? dfb 5 516 29-01-2024, 22:24 PM
Last Post: dfb
XZBMW BMW ICOM OBD main cable 15pin to 16pin body1982 5 554 27-01-2024, 04:42 AM
Last Post: body1982

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content