[Enabled]

If you're using ICOM, you must check "Programming voltage" (programming voltage controlled by ICOM) in configuration.


(And for what it's worth, it works fine with K+DCAN and VAG KKL cables.)

[Enabled]

Here you go, matching 328i file, Euro flash ID41.

Make sure you put programming voltage to ECU when flashing. (bridge pins 14 and 18 of 20-pin port together)

[Kamcio]

Here you go, matching 328i file, Euro flash ID41.

Make sure you put programming voltage to ECU when flashing. (bridge pins 14 and 18 of 20-pin port together)

It's a software for KESS or WinKfp?

Wysłane z mojego EVA-L09 przy użyciu Tapatalka

[Enabled]

It's software for E36 328i Euro version pasted over your own KESS file. Ready to flash.
It's not from Kess, and it's not from WinOLS. It's directly from a working car, read with Siemens MS41 Flash Tool.
Kess is not very good for this ecu anyways, as it's creating a 256kb file of mostly empty space. The actual car flash is just 24kb.

[Kamcio]

Thank you so much, I will try it