[kar407]

Me too i try . but no way

[douglas_brock]

And for version 12.2017, has anyone managed to use with C3?

[stojke260]

And for version 12.2017, has anyone managed to use with C3?

Yes work with C3 12.2017 bat just DAS. for now .

work with C3 03.2018 . only DAS .

[douglas_brock]

In the previous version, 09-2017 was also only in DAS right?

[jal1234]

Not enough files and mod. Yo have to change way more than that. I am able to use my C3 mux from 2014 to every version till 09/2017. My c3 mux is china C4 with proper chips. I am able diag even W204 (added to xentry).

Credit goes to someone from another forum. I did few modifications. USE GW free 3.2 patcher c3 blacklist and C4 to C3 then follow use my guide. It works every time on every version.

If you guys need pass free W204 and W212, Please send request on forum.

Hallo everyone with C3 Mux interface for mercedes diagnostics. Xentry from 03.2016 to 03 in 2017.
With C3 Muxom can be read almost all modules inklusiv on newer cars are problems with UDS instrumenttablama ... rest with the izmjenamma that are in RAR format should be no problem working ... Regards ibi1961

I did this mod today (crazy40's method) on two computers with 12.2016 Xentry, and no more 630 errors when initializing the mux. Success! I have the same mux as crazy40. The hardest part was finding GW 3.2, since glintweb seems to have disappeared.

One anomoly however. When I use XENTRY SIM, it works fine. But when it start DAS SIM within Xentry SIM by choosing a DAS supported car, such as an S220, I get communication error 1.2. Has anyone else seen this in SIM mode? Any fix?

[pesona]

failed in das sim, because the sim files doesn't exist in programdata. you have to add additional parameter to "das sim" shortcut. show the content of your "das sim" shortcut, maybe, someone can help to fix it.

[rukako]

Not enough files and mod. Yo have to change way more than that. I am able to use my C3 mux from 2014 to every version till 09/2017. My c3 mux is china C4 with proper chips. I am able diag even W204 (added to xentry).

Credit goes to someone from another forum. I did few modifications. USE GW free 3.2 patcher c3 blacklist and C4 to C3 then follow use my guide. It works every time on every version.

If you guys need pass free W204 and W212, Please send request on forum.

Hallo everyone with C3 Mux interface for mercedes diagnostics. Xentry from 03.2016 to 03 in 2017.
With C3 Muxom can be read almost all modules inklusiv on newer cars are problems with UDS instrumenttablama ... rest with the izmjenamma that are in RAR format should be no problem working ... Regards ibi1961

I did this mod today (crazy40's method) on two computers with 12.2016 Xentry, and no more 630 errors when initializing the mux. Success! I have the same mux as crazy40. The hardest part was finding GW 3.2, since glintweb seems to have disappeared.

One anomoly however. When I use XENTRY SIM, it works fine. But when it start DAS SIM within Xentry SIM by choosing a DAS supported car, such as an S220, I get communication error 1.2. Has anyone else seen this in SIM mode? Any fix?

failed in das sim, because the sim files doesn't exist in programdata. you have to add additional parameter to "das sim" shortcut. show the content of your "das sim" shortcut, maybe, someone can help to fix it.

Persona
can you put an example?

[pesona]

look the example here

Look at tips and tricks point no 3.

hope this help.

[hugomlmc]

Hallo everyone with C3 Mux interface for mercedes diagnostics. Xentry from 03.2016 to 03 in 2017.
With C3 Muxom can be read almost all modules inklusiv on newer cars are problems with UDS instrumenttablama ... rest with the izmjenamma that are in RAR format should be no problem working ... Regards ibi1961

Hi

Can you point me where do i put the files in ?

I cant find the folder .

Thanks in advance

---

Not enough files and mod. Yo have to change way more than that. I am able to use my C3 mux from 2014 to every version till 09/2017. My c3 mux is china C4 with proper chips. I am able diag even W204 (added to xentry).

Credit goes to someone from another forum. I did few modifications. USE GW free 3.2 patcher c3 blacklist and C4 to C3 then follow use my guide. It works every time on every version.

If you guys need pass free W204 and W212, Please send request on forum.

Hallo everyone with C3 Mux interface for mercedes diagnostics. Xentry from 03.2016 to 03 in 2017.
With C3 Muxom can be read almost all modules inklusiv on newer cars are problems with UDS instrumenttablama ... rest with the izmjenamma that are in RAR format should be no problem working ... Regards ibi1961

Hi can you upload the guide again ?

It´s not online anymore~.

Thanks

[grofrano]

Hello, I need to update a C4 Scanner VCI Firmware. Does anyone can help me with the process step by step?

Thanx in advance.

Gabriel