Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
E60 N52 3.0 swap coding problem
25-05-2017, 20:35 PM,
Post: #1
|
|||
|
|||
E60 N52 3.0 swap coding problem
Hi guys,
Car, E60, it had 2.3 engine, engine was swapped to 3.0 DME and CAS are stock MSV70, CAS2 VIN: WBANE31020B951065 DME_FAMILY_TYPE: MSV70 DME_ORIG_ZB: 7559593 CURRENT_VC: NE31 so, I have changed FA to NEW_VC: NE71 I searched kmm and found ZB: 7581234 and flashed it Car has error 2FA4 i have coded DME can not code CAS whatever it try, ncsexpert stops at ecu conditions error or sequence error (have tried without key, with key, with ign on) tried coding CAS with old vehicle type and it goes fine power class is obviously same as dme+cas are stock any suggestions? do i have to change power class to make it possible to code CAS with NE71? or what would you suggest? thanks |
|||
26-05-2017, 01:58 AM,
Post: #2
|
|||
|
|||
RE: E60 N52 3.0 swap coding problem
Whats the powerclass of the ZB your trying to flash to vs your original? It'll probably be easier to modify the powerclass in the new ZB your trying to flash to match your original and write it via BDM.
If you dont want to open the dme, Hassmaschine over on E90post can get you a custom ODA & OPA that you can flash via Expert Mode in WINKFP that will ignore the RSA.... |
|||
27-05-2017, 13:38 PM,
(This post was last modified: 27-05-2017, 13:48 PM by djdum.)
Post: #3
|
|||
|
|||
RE: E60 N52 3.0 swap coding problem
You need to change PowerClass in CAS dump.
Here is hint for 525, 528 & 530: B 00101100,000B,14,66,01,04,1E,02,C1,03,08,50,64 525 B 00101100,000B,14,66,01,04,1E,02,D2,03,08,50,64 528 B 00101100,000B,14,66,01,04,1E,02,E2,03,08,50,64 530 |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
FDL coding BMW Apps | Mugga | 0 | 28 |
2 hours ago Last Post: Mugga |
|
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,347 |
5 hours ago Last Post: smilo |
|
Coding a F80 M3 race car | PeterY | 10 | 461 |
Yesterday, 23:32 PM Last Post: Furgus |
|
NBT Evo CAFD missing after coding error | Mugga | 13 | 591 |
24-04-2024, 22:47 PM Last Post: Mugga |
|
6wb cluster swap and coding | xMoses | 4 | 223 |
22-04-2024, 19:07 PM Last Post: NikolaIMRS |
|
Embedded SIM swap from TCB to ATM | mcrussell | 65 | 18,839 |
22-04-2024, 16:43 PM Last Post: Vithy |
|
M performance brake DSC2 SBRE coding | Ckh091020 | 3 | 216 |
22-04-2024, 12:58 PM Last Post: Ckh091020 |
|
pulling both paddles put transmission into neutral coding | tintoverano | 1 | 117 |
22-04-2024, 12:42 PM Last Post: raresh.tazz |
|
NBT EVO Connected Drive problem after update I-Level | SkeYT | 47 | 4,705 |
22-04-2024, 11:44 AM Last Post: kwat |
|
F20 LCI2 black panel cluster coding | sqorpius | 9 | 2,010 |
21-04-2024, 12:38 PM Last Post: Adekborys69 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content