Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Please, can you help me problem dde
29-05-2017, 10:21 AM,
Post: #1
Please, can you help me problem dde
Hello. I bought galletto v54 cable and tried to read my ecu. But a cable was let loose and a spark struck in the dde. So the car does not start now.
Can I buy a used ecu with the same reference and run the car?
Right now the diagnosis tells me that there is no voltage in the ECU.
Quote this message in a reply
29-05-2017, 11:21 AM,
Post: #2
RE: Please, can you help me problem dde
(29-05-2017, 10:21 AM)zonum Wrote:  Hello. I bought galletto v54 cable and tried to read my ecu. But a cable was let loose and a spark struck in the dde. So the car does not start now.
Can I buy a used ecu with the same reference and run the car?
Right now the diagnosis tells me that there is no voltage in the ECU.

hello you could buy used ecu but will need programming.

what car is this for ?

Also post picture or 2 of ecu might be possible to repair smile

under If mine or others posts and info are helpful please give thanks/rep smile yes
Quote this message in a reply
30-05-2017, 04:40 AM,
Post: #3
RE: Please, can you help me problem dde
My car is a bmw 520d 177 cv 2009 year, ecu edc17cp02.
Ecu is this refference bosch 0281016067.
If I buy ecu with this refference and I programming with ista-p for example, is it good?
Quote this message in a reply
30-05-2017, 08:24 AM, (This post was last modified: 30-05-2017, 17:53 PM by pdc.)
Post: #4
RE: Please, can you help me problem dde
Hi

it is not enough ,because ISTA P does not program the secret Key (ISN) and the car does not start.
If you could read the old ECU you could copy to new one, but without been able to read it is more difficult,you should try to read it with kess or Ktag tool.
If the car is manual you can do immo off after programming with ista P and everything works,or buy ECU+CAS+KEYS from another car. ,if it is autobox it is a lot harder.



(30-05-2017, 04:40 AM)zonum Wrote:  My car is a bmw 520d 177 cv 2009 year, ecu edc17cp02.
Ecu is this refference bosch 0281016067.
If I buy ecu with this refference and I programming with ista-p for example, is it good?
Quote this message in a reply
28-09-2017, 11:30 AM,
Post: #5
RE: Please, can you help me problem dde
Need to do immo off
can be done in mcu flash
read it in boot mode with ktag do immo off and flash it back in boot mode
tested and working
if need help pm
Quote this message in a reply
28-09-2017, 17:23 PM,
Post: #6
RE: Please, can you help me problem dde
(29-05-2017, 10:21 AM)zonum Wrote:  ................
Right now the diagnosis tells me that there is no voltage in the ECU.

Have fault ?

4660/4661
4120/4121
Quote this message in a reply
10-10-2017, 12:11 PM,
Post: #7
RE: Please, can you help me problem dde
Cannot program used ecu on bmw with bmw oficial tools !!
ecu with same sw hw number will be ok but must remove immo of create ecu files with isn from your ews , cas, and write it in replacement ecu.
remove immo is from replacement ecu ecu is more simple and faster solution
Quote this message in a reply
10-10-2017, 12:22 PM,
Post: #8
RE: Please, can you help me problem dde
If u can read Eprom from your DDE end read Eprom from your CAS3 i can solve your problem.

If u have Autohex or BMW explorer u can do all this by OBD
Quote this message in a reply
[+] 2 users say Thank You to nesa for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Bmw 5,f10 radio problem RobertRexhaj 3 73 4 hours ago
Last Post: Unspec
  ISTA launcher problem Red_bean_bun 1 157 26-03-2024, 05:11 AM
Last Post: 2013m5
  Dme Cas synchronization Problem donjuan020 3 203 25-03-2024, 21:55 PM
Last Post: BmwMerc
  BMW e39 530d 2001 problem after MAF change boweld11 3 103 24-03-2024, 22:44 PM
Last Post: SkeYT
XZBMW Entrynav2 Maps Problem Chillmeister 3 286 24-03-2024, 17:18 PM
Last Post: Chillmeister
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 3,900 24-03-2024, 11:29 AM
Last Post: Twointje
  Battery lead positive underfloor problem da.2022 10 196 24-03-2024, 09:38 AM
Last Post: pupu144
  Problem Retrofit electrified steering column on the G31 LCI smercki 12 331 22-03-2024, 12:55 PM
Last Post: Node
XZBMW X5 G05 with MGU and ATM: GPS problem david357 8 786 19-03-2024, 21:25 PM
Last Post: Mwahab
  Bmw G31 retrofit Mgu id7 atm problem intranet 14 1,876 19-03-2024, 10:07 AM
Last Post: evaldazj

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content