[dynamicsteam]

Hello,

Got a Renault Scenic 3 that i need wiring diagram for wipers please. This model has twin wiper motors and both stopped. Passenger side stopped first, then drivers side hit passenger wiper and that stopped as well. Fuses OK. Got good 12 volts to both motors. Really need diagram to see what is going on. Looks like both motors have to work together. Maybe master and slave but unsure.


Many Thanks

[dynamicsteam]

This car is now fixed. Wipers on Renault Scenic 3 work as master and slave. Both motors have to work together. I took covers off both motors to look at the internals. Driver and passenger motor both had water ingress. The water tight seal on both motors had failed. Changed both motors and all working again.

One thing to note. The scuttle drains are right under the motors and are impossible to clean out without removing the wiper motors. Stupid design. Both were full of leaves. Best to clean out before fitting new motors !

The new motors have to be initialised. Set wiper control to zero position on wiper stork. Turn on ignition but do not start engine. Move wiper control to position one then back to zero. Turn off ignition and your done. Wipers will now be in sync and work fine.


Hope this post helps someone ! If it does please leave a thanks