Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ESYS How to remove no existing unit
23-06-2017, 10:42 AM,
Post: #1
|
|||
|
|||
ESYS How to remove no existing unit
Hi
Retrofitted Kafas 2 in the car which was equipped only with FLA high beam assistant but for some reason Unit is still visible for the car even if it disconnected and all coding done. How to rid off it from VO?? when esys reading from ecu unit is not visible, but when reading from svt FLA visible thanks FLI Screenshoot |
|||
23-06-2017, 13:33 PM,
Post: #2
|
|||
|
|||
RE: ESYS How to remove no existing unit
Remove from vo or send me the vin.
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
23-06-2017, 16:23 PM,
Post: #3
|
|||
|
|||
RE: ESYS How to remove no existing unit
You have to remove the option from the VO.
|
|||
23-06-2017, 18:17 PM,
Post: #4
|
|||
|
|||
RE: ESYS How to remove no existing unit
Guys I cant remove 5AC option (high beam assistant) as KAFAS using the same VO code for high beam assistant, plus additional others
So basically in VO is no any option code for FLA So I added 5AS additional and coded almost all ecus, physically disconnected FLA unit but fuck sake How car still see that unit in VO???? |
|||
23-06-2017, 21:40 PM,
Post: #5
|
|||
|
|||
RE: ESYS How to remove no existing unit
Without vin I can't check it.
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
24-06-2017, 01:15 AM,
Post: #6
|
|||
|
|||
RE: ESYS How to remove no existing unit
Found problem.
Update VCM and MSA or just VCM should be on in settings that's all |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content