[mjuhl2003]

And why does that happen?


Sent from my iPhone using Tapatalk

[petersamer012]

You have to uptade winkfp.



1 run winkfp click import PABD Browse to your unpacked daten folder and drill down to "sgdat". [base]\SP-daten-E60\sgdat\. Hit
CTRL-A to select all files, then click "Import"
2 Now select again "Import/Export" in the main menu, and pick "Import" then "P-SGBD" and, like
step 3, browse to your unpacked daten folder and drill down to "ecu". [base]\SP-daten-E60\ecu\. Hit
CTRL-A to select all files, then click "Import"
4 Now select again "Import/Export" in the main menu, and pick "Import" then "Assembly Line data
5. Browse to your unpacked daten folder and drill down to "data". [base]\SP-daten-E60\data\ and make sure "data" is highlighted and select "OK"

Open the regular file explorer and browse to your unpacked daten folder and drill down to
"gdaten". [base]\SP-daten-E60\data\gdaten\

Hit CTRL-A to select all files, then CTRL-C to copy all files to clipboard. Now browse to your
NFS folder (usually C:\EC-APPS\NFS\ or just C:\NFS\ depending on your installation) then browse
down to "data\gdaten" and hit CTRL-V to paste the copied files. If there are files already in this
directory, overwrite them with the files you copied.

now you last step configure you click configure in winkfp
set PABD format IPO API tracelevel 1 and IFH tracelvel


Now exit WinKFP done..
please see manual picture. or you download winkfp import pdf manual in google search.
if you dont have sp daten you may use ista p data e60 ecudata in ista P

[egyclick]

Easiest is to use Bmw Coding Tool from here
to update WinKfp with Sp-daten, the old fashion was done years ago, as the times go by, these tasks are simplified.