Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

E39 MS41.0 EWS ISN or IMMO Off
27-06-2017, 08:02 AM,
Post: #1
XZBMW  E39 MS41.0 EWS ISN or IMMO Off
Heya all yes
Another BMW issue. I have a 1998 BMW E39 525 which the EWS & key has been replaced. (Old EWS TOAST)
What is the easiest solution to get working via OBD connector??
Read DME with Kess V2/VG Tech V54 and IMMO off with IUD 3.2??
Read with ROM Raider , Open MS41 or Siemens MS41 Flash Tool & remove EWS from file??
IMMO emulator?? - Still need to read ISN from DME & editor to write ISN to emulator??
Another way to read & write ISN to either EWS or DME then sync
Or just burn it n have another beer???

Cheers pepsi
Quote this message in a reply
27-06-2017, 09:45 AM,
Post: #2
RE: E39 MS41.0 EWS ISN or IMMO Off
Send the original file ,galletto (PIN_OUT_ECUS)
Quote this message in a reply
[+] 2 users say Thank You to wieslov for this post
28-06-2017, 02:04 AM, (This post was last modified: 28-06-2017, 02:53 AM by Enabled.)
Post: #3
RE: E39 MS41.0 EWS ISN or IMMO Off
Does car crank? Is starter working?
IF YES, just align EWS with INPA or similar (even the simple program called "EWSSync.exe").
If you have matched key and EWS module, you do not need delete. It's much simpler than that.


IF NO (car does not crank):
Post 24kb partial flash here and we can do it easy. EWS disable in MS41 is simple.

Then you must remove EWS module and bridge the black/yellow starter lines.






EWS delete in engine control module by itself will not solve issues with starter cranking (when key is mismatched). EWS module controls starter function.
Quote this message in a reply
[+] 2 users say Thank You to Enabled for this post
28-06-2017, 09:29 AM,
Post: #4
RE: E39 MS41.0 EWS ISN or IMMO Off
Heya yes
Yes car cranks, but not start. Tried to sync with BMW scanner 1.4 - Fail
Read file with FG Tech 24kb

Cheers pepsi


Attached Files
E39 MS41.0.rar
File Type: .rar
Downloaded: 64 times
Size: 7.74 KB

Quote this message in a reply
28-06-2017, 14:14 PM, (This post was last modified: 28-06-2017, 18:08 PM by Enabled.)
Post: #5
RE: E39 MS41.0 EWS ISN or IMMO Off
To align ews you need to connect to the 20-pin port under hood (bonnet). PASoft 1.4 is OBD port only (but you can try using an adapter). Although I am not sure how good PASoft 1.4 is with the early cars.

I will have your file EWS deleted in a little bit.

Here you go.
Checksums are correct

IMPORTANT: when you flash you need to enable write mode like this https://sites.google.com/site/openms41/r...able-write

Or else flash file will not write


Attached Files
e39 ms41 ewsdel.zip
File Type: .zip
Downloaded: 78 times
Size: 8.14 KB

Reputation: +1 - sparky001 [+1]
Quote this message in a reply
[+] 2 users say Thank You to Enabled for this post
29-06-2017, 05:36 AM,
Post: #6
RE: E39 MS41.0 EWS ISN or IMMO Off
(28-06-2017, 14:14 PM)Enabled Wrote:  To align ews you need to connect to the 20-pin port under hood (bonnet). PASoft 1.4 is OBD port only (but you can try using an adapter). Although I am not sure how good PASoft 1.4 is with the early cars.

I will have your file EWS deleted in a little bit.

Here you go.
Checksums are correct

IMPORTANT: when you flash you need to enable write mode like this https://sites.google.com/site/openms41/r...able-write

Or else flash file will not write

Heya mate,
Thanks for that. Tried EWS sync first. It only read 3 symbols 6AB or something, tried to sync, Ign off for 15 secs - Not work
Had a look at 20 pin connector, no pin 2,14,17.
Had a quick look for a hidden 16 pin OBD inside car, yeah nah
Have told him to go get full matching kit, DME,EWS & key
Had enough for the week gavel

Cheers pepsi
Quote this message in a reply
29-06-2017, 20:18 PM,
Post: #7
RE: E39 MS41.0 EWS ISN or IMMO Off
Whoops, forgot this was European version only.

Apply +12V to pin 18 (programming voltage, enables WRITE MODE), and program via K-line (pin 20).
Quote this message in a reply
[+] 2 users say Thank You to Enabled for this post
30-06-2017, 01:12 AM,
Post: #8
RE: E39 MS41.0 EWS ISN or IMMO Off
HER YOUR OFF 100/100
FOR ISN YOU NEED POST COMPLET DUMP


Attached Files
WinOLS (10057.rar
File Type: .rar
Downloaded: 59 times
Size: 7.78 KB

Quote this message in a reply
[+] 2 users say Thank You to rabie_m for this post
30-06-2017, 01:56 AM,
Post: #9
RE: E39 MS41.0 EWS ISN or IMMO Off
(30-06-2017, 01:12 AM)rabie_m Wrote:  HER YOUR OFF 100/100
FOR ISN YOU NEED POST COMPLET DUMP

My method works for sure as well.. Wondering why you're changing lambda sensor feedback in his file?
Quote this message in a reply
[+] 2 users say Thank You to Enabled for this post
01-08-2019, 14:32 PM,
Post: #10
RE: E39 MS41.0 EWS ISN or IMMO Off
I need immo off total ,i hawe only ecu and engine
ms41 tool no working!Fuel pump ok ,but no spark and no  injector pulses ,wires are all ok -tested with inpa  on act =injectors working!


Attached Files
dk ms41.rar
File Type: .rar
Downloaded: 8 times
Size: 176.8 KB

Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
PCitroen Citroen Berlingo Lucas DCN2 immo off pepi 2 30 1 hour ago
Last Post: pepi
  Porsche SDI4 immo off Mohamad.sy 2 29 2 hours ago
Last Post: Mohamad.sy
ZTAudi VAG Simos 8.32 immo off or clone ahmadarifai 7 120 6 hours ago
Last Post: ahmadarifai
  VW BEETLE SIMOS 3.3A IMMO OFF (SOLVED) djollie 4 319 Yesterday, 20:06 PM
Last Post: vlahdacoroman
  Solved ✔ EDC15V immo off matuuu 3 47 Yesterday, 17:02 PM
Last Post: matuuu
XZBMW Solved ✔ E46 330D immo off Pentheus 3 73 Yesterday, 16:42 PM
Last Post: Pentheus
JFiat Fiat Ducato - 2009 - 0281 015 576 - immo off mini1.3 1 23 Yesterday, 14:11 PM
Last Post: bboctavian
  MR2 Solution Add keys or Immo Off Need mkii 1 94 Yesterday, 06:16 AM
Last Post: mkii
ZTAudi VL300 immo transfer mecatech 3 76 26-03-2024, 21:26 PM
Last Post: mecatech
ORenult Md1cs006 Renault Immo Off aboelgood 2 64 26-03-2024, 20:43 PM
Last Post: Platinum

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content