Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Beginners - Buyers guide to xprog M - input needed please
29-06-2017, 15:43 PM, (This post was last modified: 29-06-2017, 20:13 PM by champagnecharly.)
Post: #1
Beginners - Buyers guide to xprog M - input needed please
There are lots of different xprog versions. I see people have issues with firmware updates. For somebody who is about to purchase one of these which version is recommended?

I am a little cautious of anything coming from China. i read enough of the issues missing or wrong components in the VAS 5054a. Should we be equally as cautious with the Xprog M?

Thanks to all those who can assist.

While on this.. I thought i might add a few dumps for Atmega64 as I collate them

Reading further Maybe OS compatibility is an issue too.

I presume stability is also down to OS. Which versions should we be running on which OS? When does W7 offer more stability than XP and shoudl we look at 32bit? What about W8 and W10? Should we forget those completely ?


I read the following in another post:

(22-03-2017, 11:56 AM)chong5195 Wrote:  Alex eobd so 5.5.5 cannot run in window 8.1 or 10... if u got any idea pls share thank u




(22-03-2017, 15:22 PM)domelec Wrote:  Most softwares were made for xp
this is a known fact and many softwares had problems running on win7 etc so with newer os like windows 8 is going to be an even bigger problem especially if the software is old like most car softwares (CK) are all done for nowadays windows xp and windows 7 32bit systems
how many times do people need to hear this same thing?????

if you want newer working software for newer versions of windows ie 8/10 etc then buy the original and get the support from the developers of said software/hardware.

I read in http://cartechnology.co.uk/showthread.php?tid=22818:

5.5.0 runs in window8.1.
5.5.5 cannot run at window8.1
Unsure if x64 or 32bit

alexeobd2
xprog 5.5.1,5.5.5,5.7.0 works on windows 10 x64 no problem
chong:
555. 5.6.0 i try runing in window 10 . buy still not work .. but mine is window 10 home 32bit

Can somebody confirm?


Attached Files
xprog dump 5.5.1 the most stable version from luis..rar
File Type: .rar
Downloaded: 58 times
Size: 445.83 KB

atmega 451.RAR
File Type: .rar
Downloaded: 23 times
Size: 57.49 KB

ATmega64 5.0 No Micronas .rar
File Type: .rar
Downloaded: 24 times
Size: 23.1 KB

X-prog 5.50.rar
File Type: .rar
Downloaded: 49 times
Size: 28.45 KB

Reputation: +1 - JarsaR [+1]
Quote this message in a reply
[+] 8 users say Thank You to champagnecharly for this post
29-06-2017, 16:05 PM,
Post: #2
RE: Buyers guide to xprog M
In my opinion 5.5.1 is the most stable for now. if you have other programmers you can buy any version. Most of them is free on the net you can reprogram the atmega and have all to test them thumbsup

No help for people not give a feedback
Quote this message in a reply
[+] 4 users say Thank You to loki954 for this post
29-06-2017, 16:10 PM, (This post was last modified: 29-06-2017, 17:01 PM by champagnecharly.)
Post: #3
RE: Buyers guide to xprog M
The following is copied from buyobdii
Clearly 5.7 offers much more. but is it better to save $ and get earlier version and flash.. or just buy full 5.7?

Any thoughts on PCB and its components? Any suggested upgrade?

X-PROG V5.70 Introduction:
Model name:Xprog M 5.7V
Software Version:V5.70 ,FW :3.9
Update:No update now
Car Models:For Multi-cars,no year limited.
Languages:English
Functions:Ecu Programmer
Connection:By Chips board connection.

[Image: x-prpg-5.7-fw.jpg]

Install/User Note:

1. This version XPROG-M can decrypt new version BMW CAS4.
2. With USB Dongle, more convenient and secure.
3. Add new authorization: AUTH-0025 Authorized 11/4/2014
4. No operation system limitation, software can be installed on Windows XP,
5. If your X-Prog is older version,cannot use this newest dongle to update to V5.70
6. Close all of the computer anti-virus software. If not, X-prog software may be killed.
7. Disconnect the internet. If not, the internet may damage the hardware.
8.our xprog-box hardware cannot work with other lower or higher version software. If not, the hardware will be damaged.
9. Never try to UPDATE, the hardware will be damaged if you want to try to upgrade it online, without any warranty.

Our Xprog 5.7 PCB Pictures:

[Image: xprog-5.7-chips-1.jpg]

[Image: xprog-5.7-chips-2.jpg]

[Image: xprog-5.7-chips-3.jpg]

XPROG-M V5.70 Description :
Authorizations:
AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)
AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)
AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)
AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)
AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.
AUTH-0008 BMW EWS3 authorization
AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)
AUTH-0010 MB ZGS001 authorization
AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)
AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)
AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM)
AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage,chassis number (VIN), serial number and PIN code).
AUTH-0023-1 MAC7xxx
AUTH-0023-2 XC23xx
AUTH-0024-1 MC9S12Cxx
AUTH-0024-2 MC9S12XE
AUTH-0024-3 9S12XE SECURITY
AUTH-0024-4 MC9S12HA/HY/P
AUTH-0025-1 MPC/SPC5xxx Authorized 11/4/2014

XPROG-M V5.70 Adapters:
ADP-0001 TMS370 PLCC28 programming adapter
ADP-0002 TMS370 PLCC44 programming adapter
ADP-0003 TMS370 PLCC68 programming adapter
ADP-0004 Motorola HC05B/X PLCC52 programming adapter
ADP-0005 Motorola HC05B/X QFP64 programming adapter
ADP-0006 ST M35080 in-circuit programming adapter
ADP-0008 TMS374 family in-circuit programming adapter
ADP-0009 MC68HC05V12 programming adapter
ADP-0010 TMS374 on-board programming adapter
ADP-0011 HC11EA9/E9 programming adapter
ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter
Additional adaptor for 5M48H P-Flash

XPROG-M 5.70 Software Looks:
Compare with X-PROG 5.55/5.60,the NEWEST XPROG-M 5.70 has more function:


[Image: xprog-5.7-software-1.jpg]

[Image: xprog-5.7-software-2.jpg]

[Image: xprog-5.7-software-3.jpg]

[Image: xprog-5.7-software-4.jpg]

[Image: xprog-5.7-software-5.jpg]

[Image: xprog-5.7-software-5.jpg]

[Image: xprog-5.7-software-6.jpg]

[Image: xprog-5.7-software-7.jpg]

[Image: xprog-5.7-software-8.jpg]


Quote this message in a reply
[+] 2 users say Thank You to champagnecharly for this post
06-07-2017, 10:27 AM,
Post: #4
RE: Beginners - Buyers guide to xprog M - input needed please
Ok. So updating is possible. Can somebody please say the earliest XPROG M Clone that can be used to update to 5.51?
Quote this message in a reply
07-07-2017, 22:49 PM,
Post: #5
RE: Beginners - Buyers guide to xprog M - input needed please
(06-07-2017, 10:27 AM)champagnecharly Wrote:  Ok. So updating is possible. Can somebody please say the earliest XPROG M Clone that can be used to update to 5.51?

5.0 is earliest you can buy but you wont find much diference in price cash betwen 5.0 and 5.5..and some adapters are also changed from rev.B to rev.C so beter buy new one...
Quote this message in a reply
[+] 2 users say Thank You to rs@chip for this post
08-07-2017, 00:38 AM, (This post was last modified: 08-07-2017, 00:39 AM by champagnecharly.)
Post: #6
RE: Beginners - Buyers guide to xprog M - input needed please
Ok. Thanks. I'd just ordered 5 but will modify and check adapter revisions. Thanks For the tip.

Sent from my SM-G930F using Tapatalk

Had ordered 5 and 5.7 so I had one either spare or as to program other.

Sent from my SM-G930F using Tapatalk
Reputation: +1 - Aldi [+1]
Quote this message in a reply
[+] 2 users say Thank You to champagnecharly for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
PPeugeot Immo off and virgin needed for Valeo J34P ecu MARTINS AUTOMECH 1 41 26-03-2024, 06:53 AM
Last Post: sivyx
PCitroen flash bsi C4 JC needed baatouz 0 39 19-03-2024, 12:02 PM
Last Post: baatouz
  chiploader 1.97.7 needed tihiuvek 3 975 16-03-2024, 09:23 AM
Last Post: MPTeam
  Bmw edc16c1 immo help needed tihiuvek 1 91 15-03-2024, 06:26 AM
Last Post: raffy haddad
  polo tsi med 17.5.25 immo off needed andys197 13 300 14-03-2024, 11:58 AM
Last Post: andys197
  NV400 2018 BCM-N3 PIN code needed! parvanov3 0 43 13-03-2024, 11:04 AM
Last Post: parvanov3
ORenult Renault Espace UCH cleared ISK needed zszoli 2 133 06-03-2024, 10:08 AM
Last Post: raffy haddad
PCitroen C4 1.6HDI 0281012980 Full BDM needed! parvanov3 1 58 04-03-2024, 18:27 PM
Last Post: al70
PPeugeot Vergin needed ecu valeo psa v 34.1 didi70 1 85 23-02-2024, 09:08 AM
Last Post: snake13
  citroen c5 bsi dump needed K01 966405878001 ottway 0 37 16-02-2024, 13:08 PM
Last Post: ottway

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content