Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Fault code 2A61 N46 engine
|
06-07-2017, 21:36 PM,
(This post was last modified: 06-07-2017, 21:36 PM by Fx82.)
Post: #1
|
|||
|
|||
|
Fault code 2A61 N46 engine
The car got an error with the valvetronic.
Data of the car: E90 2006 N46 engine. The fault code which is stored is: 2A61 - Not possible to store learning values in EEPROM I looked up the history of the car and the servo motor + eccentric shaft sensor already have been replaced with new ones. On the cluster there is a red car symbol + the message electronic failure. Go to the nearest BMW dealer. I did measure the voltage on the servo motor which is between 4,3 and 4,7V. I also checked the wiring and it all looks good. I've searched the internet and found only 2 topics. 1 topic there was no reply given and the other one had a wiring problem. Does anyone has some tips what I should check? MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
09-07-2017, 13:24 PM,
Post: #2
|
|||
|
|||
|
RE: Fault code 2A61 N46 engine
I managed to get code 2A61 out. I've reset every ecu and it would store the values again but it doesn't make sense anyway that code is cleared.
Still got the error of electronic malfunction with the symbols of steering sensor, abs en handbrake. MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
|
|
|
09-07-2017, 17:53 PM,
Post: #3
|
|||
|
|||
|
RE: Fault code 2A61 N46 engine
As i remember in documentation its mentioned that servomotor should be 5v
maybe vin mismatch? check UIF using inpa |
|||
|
|
|
09-07-2017, 19:48 PM,
Post: #4
|
|||
|
|||
|
RE: Fault code 2A61 N46 engine
Luckily I know the history of the car and al modules are original only it has a cic unit but it has been installed in the car for 1,5 year.
I measured the voltage when the car was on ignition. I compared it with another car and it show the same voltage. MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
|
|
|
09-07-2017, 20:05 PM,
Post: #5
|
|||
|
|||
|
RE: Fault code 2A61 N46 engine
2A61 - Not possible to store learning values in EEPROM
You need to replace valvetronic sensor common problem ,,, check connector , if you have oil that is your sine is bad ... |
|||
|
|
|
09-07-2017, 20:48 PM,
Post: #6
|
|||
|
|||
|
RE: Fault code 2A61 N46 engine
|
|||
|
|
|
09-07-2017, 22:33 PM,
Post: #7
|
|||
|
|||
|
RE: Fault code 2A61 N46 engine
I've replaced that sensor 2 years ago
 That wouldn't explain the electrical malfunction error
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
|
|
|
09-07-2017, 23:01 PM,
Post: #8
|
|||
|
|||
|
RE: Fault code 2A61 N46 engine
Maybe servomotor is stucked? Check through rheingold if angles are same (desired and actual)
|
|||
|
|
|
10-07-2017, 06:57 AM,
Post: #9
|
|||
|
|||
|
RE: Fault code 2A61 N46 engine
Have you checked the Timing.......? It could have jumped a tooth and casing that fault code.......
If My Post Was Helpful
Than Please Click On Thanks & Rep..  |
|||
|
|
|
11-07-2017, 21:55 PM,
(This post was last modified: 14-07-2017, 07:58 AM by Fx82.)
Post: #10
|
|||
|
|||
|
RE: Fault code 2A61 N46 engine
Servo motor is working perfectly. The proces of teaching in can be successfully executed.
I didn't check the timing but if it would be the timing I would get a misfire code. The electrical error is the one that needs te be solved. MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
|
REQUEST FSC CODE | muskatas | 4,263 | 353,409 |
4 hours ago Last Post: navigatepark |
|
|
BMW Navigation Maps FSC activation code (request) | rogerkj71 | 82 | 11,238 |
Yesterday, 08:29 AM Last Post: Erezbmwm |
|
|
FSC Code for Route Maps | Bimmer540 | 236 | 34,438 |
15-04-2024, 12:50 PM Last Post: energjia |
| DDE509 Internal fault 7 code 4703 | GoNz0- | 0 | 53 |
14-04-2024, 14:42 PM Last Post: GoNz0- |
|
| Mini Tooth to mechanical code | koziol | 0 | 72 |
14-04-2024, 14:27 PM Last Post: koziol |
|
| VO code RSE_HIGH_NBT2 error | HU_man | 3 | 132 |
12-04-2024, 07:08 AM Last Post: Node |
|
| G05 KAFAS4 enable code missing after Retrofit ACC | 6ergsm | 19 | 2,455 |
26-03-2024, 12:33 PM Last Post: Hodgsonp |
|
|
|
M3 F80 LCI Airbag fault | Stefan1251 | 8 | 371 |
25-03-2024, 00:18 AM Last Post: armenh7 |
| Engine swap E60 535d --> E61 530d coding advice requested | Stratofortress | 9 | 398 |
23-03-2024, 14:59 PM Last Post: Simoniak |
|
|
|
How to change VIN code in VCM via Esys? | vipsha | 5 | 1,437 |
14-03-2024, 22:20 PM Last Post: tcp443 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
