Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Anyone using a Diagbox V7?
10-07-2017, 18:47 PM,
Post: #1
|
|||
|
|||
Anyone using a Diagbox V7?
I have seen them for sale at less than $40 and I'm looking to use one to program some Peugeot keys.
If you are using this hardware do you have the supplied software running on Win 8 / 10 64 bit as the retailers suggest it will only run at 32 bit on Win 7? the CHARioT Smart Thermostat
|
|||
10-07-2017, 22:04 PM,
Post: #2
|
|||
|
|||
RE: Anyone using a Diagbox V7?
(10-07-2017, 18:47 PM)pieman64 Wrote: I have seen them for sale at less than $40 and I'm looking to use one to program some Peugeot keys. Hello I use diagbox 7.49 on win 7 32bit without problems. I have not tried key-learning. So a plug for 40 will not work so long. (With me about 2 years) have now a second for 100 and "full chip" |
|||
10-07-2017, 22:12 PM,
Post: #3
|
|||
|
|||
RE: Anyone using a Diagbox V7?
Thanks for your feedback @slawcio26
Have you never tried the Diagbox on 64 bit machines running Win 8 / 10? the CHARioT Smart Thermostat
|
|||
11-07-2017, 06:59 AM,
Post: #4
|
|||
|
|||
RE: Anyone using a Diagbox V7?
Do you have to use the Windows 8 system only? A lot of software runs perfectly on Windows 7, and a lot of them are starting to support Windows 10.
|
|||
11-07-2017, 11:50 AM,
(This post was last modified: 11-07-2017, 11:51 AM by pieman64.)
Post: #5
|
|||
|
|||
RE: Anyone using a Diagbox V7?
(11-07-2017, 06:59 AM)bingking Wrote: Do you have to use the Windows 8 system only? A lot of software runs perfectly on Windows 7, and a lot of them are starting to support Windows 10. I only have Win8 and Win10 machines but the vendors strongly suggest Win7 only, or specifically 32 bit rather than 64 bit. I don't want to get bogged down with virtual machines either. the CHARioT Smart Thermostat
|
|||
11-07-2017, 17:24 PM,
Post: #6
|
|||
|
|||
RE: Anyone using a Diagbox V7?
I run Diagbox 7.83 on Windows 7 64 bit. Works perfectly
|
|||
11-07-2017, 18:16 PM,
(This post was last modified: 11-07-2017, 18:17 PM by pieman64.)
Post: #7
|
|||
|
|||
RE: Anyone using a Diagbox V7?
Thanks Merseycruise at least confirmation it works with 64 bit is a step forward. I'm not really aware of any fundamental differences between Windows 7 and 8 so it sounds like it should be OK.
the CHARioT Smart Thermostat
|
|||
13-07-2017, 05:37 AM,
Post: #8
|
|||
|
|||
RE: Anyone using a Diagbox V7?
For me diagbox 7 worked only on 32bits os ( win 7 only) not xp.
On 64bits i am not sure the PP2000 application will start ( its inside diagbox for old cars under 2009) |
|||
13-07-2017, 05:59 AM,
(This post was last modified: 13-07-2017, 06:48 AM by pieman64.)
Post: #9
|
|||
|
|||
RE: Anyone using a Diagbox V7?
(13-07-2017, 05:37 AM)votkarel Wrote: For me diagbox 7 worked only on 32bits os ( win 7 only) not xp. My car is a 2004 model so it's important PP2000, or equivelant, works. Anyone got ideas for cheap hardware for DIY enthusiast to code Peugeot 307 (2004) keys? I have seen the "yellow dongles" (you know what I mean) and similar WiFi modules for half the price but still unsure on the software for Win 8 / 10. (11-07-2017, 17:24 PM)Merseycruise Wrote: I run Diagbox 7.83 on Windows 7 64 bit. Works perfectly Have you used the PP2000 element of Diagbox 7.83 on your Win 7 64 bit machine i.e. key reprogramming for older Peugeot's (mine is a 307 convertible from 2004)? the CHARioT Smart Thermostat
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content