[E46]

Hi friends.

Where i can found the interface for Nissan Consult III+ ?

[TriStar_Qatar]

Hmmmm, I get software does not support this pc?
I'm using a Toughbook with Win 7 32.
Am I doing something wrong?

[Starmobile]

Hmmmm, I get software does not support this pc?
I'm using a Toughbook with Win 7 32.
Am I doing something wrong?

Hi CT,for me i installed on Toughbook cf-31 win 7 pro x64 so i could installed update 71.20 too without inx file,i try to install Aliance VI from consult III but i can't find the driver i just have driver for VI2 and i want to know if this version 71.11-71.20 can do immo function without immo card,thanks.

[perfectmatch]

Hi all, i installed the V71.11.00 or 71.20.00 with no problem, i using Snap On Pass Thru Pro III, when i scan 2012 nissan everything fine, but when scan on 2014 or up, it freeze at 88%, any idea? please help!
Many Many Thanks!

[tamnuni]

Hi friends.
i can read dtc but can't read live data i use mongoos pro is there any solusion ?
thank's

[Wesk18]

What you see is what you get:
a) Nissan Consult III+ Plus V71.11.00 & 71.20.00 from 05.2017
b) Nissan Consult III+ Plus V71.31.00 & 71.40.00
c) Nissan Consult-III+ Programming Data V71.1F; 71.2; 71.3 & 71.4
d) Nissan Consult III+ Operation Manual
e) Nissan Pin Code Tool
f) Nissan Super Code Tool

So i think is complete now.
Enjoy guys

Does it required a cr*ck to activate this?

[STP]

OK, I have consult III installed on my laptop and thought that the OBDII connector that I use for FORD and GM vehicles was going to work but I was wrong.
Can you recommend an OBDII connector that I can purchase to use with the Nissans Consult III.

Thank You,
STP

[SuperStrips]

Hi friends.
i can read dtc but can't read live data i use mongoos pro is there any solusion ?
thank's

The ONLY way to get datastream and be able to re/program is to use a Consult 3+ VI, legit or a good clone.

Not what y'all wanted to hear, but it is what it is.

[J415UNNY]

Could someone please help me with the following:

Install v71.11 OK on my dell d630 using W7 32BIT
Then I try install v71.40 but failed with the following error:

"CONSULT-III plus software does not support this PC"

From my understanding, to bypass this I must have a modified .INX file.

Thank you.

[duncho]

Nissan Consult 3+ v72.13 patched. Works also on Windows 10 64bit computers. I run it on MacBook Air (win10 partition).