Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
【Unsolved】Need FULL BDM Citroen c4 1.6hdi
31-07-2017, 02:16 AM,
(This post was last modified: 31-07-2017, 02:32 AM by Gabriel130592.)
Post: #21
|
|||
|
|||
RE: 【Unsolved】Need FULL BDM Citroen c4 1.6hdi
(30-07-2017, 22:32 PM)CHIKODIAG Wrote: Hi the virgin file is good it was read with x prog for that it has 2kb Hello! With your file the vehicle starts but the error codes appear: P1603 ECU P1351 Preheating Relay circuit The injectors are encoded with Diagbox. The car still does not exceed 3000rpm with these faults. I've virginized the original file and coded the ECU with Diagbox and coded the injectors. In the Eeprom 349 differences have been made but still giving the error code: P1613 downloading When you start the first time engine failure appears, and does not exceed 3000rpm. You turn off the car, turn it back on and it works perfectly. When you leave the car 20 mins off you start it and skip the fault again. It is necessary to start, stop and start again to allow the car to go from 3000 rpm. The eeprom is defective. Attached file broken ORIGINAL (1) I attached the VIRGINIZED file of this Eeprom (2) I attach the file CODED with LEXIA (Replacement ECU and Inyectors) (3) Any solution? Greetings and thanks in advance. Regards |