Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. Martech

  2. ATM - Balkan

    atm balkan file service
  3. Porsche piwis

  4. MOD FILES

  5. ProCarDiag

  6. ECU CHIPS



Post Reply 
DIGIPROG 3 user help thread !
15-01-2014, 15:23 PM
Post: #31
ZVW RE: DIGIPROG 3 user help thread !
(15-01-2014 14:05 PM)Amir2020 Wrote:  
(24-12-2013 13:53 PM)Avtoprofi Wrote:  Hy

i have try a polo MM and trough obd was no suches wink2
look the manual yes

Do you have a manual


Attached File(s)
VW POLO MM HCS12.rar
File Type: .rar
Downloaded: 98 times
Size: 213.52 KB


Remapping EcoTuning Dpf Egr Dtc Remove Immo Off Airbag Repair
KESS V2 Car Bike & FGTech V54 & SMOK & DIGIPROG III YH V4.94....

Stop worrying about what can go wrong, and get excited about what can go right.
PRESS THANKS IF YOU LIKE MY POST AND IT HELPED YOU evilgrin
Find all posts by this user
Quote this message in a reply
 Thanks given by: Amir2020
15-01-2014, 15:57 PM
Post: #32
RE: DIGIPROG 3 user help thread !
Volvo xc90 dash ok
Yamaha r1 2002 ok

I have question. BMW 2006 335 E90 the milage is also stored in the key ? How does this work? Does the Key change milage When the tacho and cas unit is set with new milage?

Please help me and please explain for me how to do.
Find all posts by this user
Quote this message in a reply
15-01-2014, 16:59 PM
Post: #33
RE: DIGIPROG 3 user help thread !
(15-01-2014 15:57 PM)P206gti Wrote:  Volvo xc90 dash ok
Yamaha r1 2002 ok

I have question. BMW 2006 335 E90 the milage is also stored in the key ? How does this work? Does the Key change milage When the tacho and cas unit is set with new milage?

Please help me and please explain for me how to do.

hy, as i know the bmw has in dash eeprom m35080,for this you need special eraser or new one, than you need to do the cas modul and i think thats all wath you need to do wink

Remapping EcoTuning Dpf Egr Dtc Remove Immo Off Airbag Repair
KESS V2 Car Bike & FGTech V54 & SMOK & DIGIPROG III YH V4.94....

Stop worrying about what can go wrong, and get excited about what can go right.
PRESS THANKS IF YOU LIKE MY POST AND IT HELPED YOU evilgrin
Find all posts by this user
Quote this message in a reply
15-01-2014, 22:39 PM
Post: #34
XZBMW RE: DIGIPROG 3 user help thread !
(15-01-2014 16:59 PM)Avtoprofi Wrote:  
(15-01-2014 15:57 PM)P206gti Wrote:  Volvo xc90 dash ok
Yamaha r1 2002 ok

I have question. BMW 2006 335 E90 the milage is also stored in the key ? How does this work? Does the Key change milage When the tacho and cas unit is set with new milage?

Please help me and please explain for me how to do.

hy, as i know the bmw has in dash eeprom m35080,for this you need special eraser or new one, than you need to do the cas modul and i think thats all wath you need to do wink

Hi okey. But what happens with the keys? They have a memory too? You can give the key to dealer and they can read your milage on it? Is this key also getting the new milage as the car when done in cas and dash??
Find all posts by this user
Quote this message in a reply
19-01-2014, 11:57 AM (This post was last modified: 19-01-2014 12:00 PM by romanr.)
Post: #35
RE: DIGIPROG 3 user help thread !
BMW 1r F20 work good ...

Superb2 2013 ok
audi A6 2012 ok
Opel tigra 2011 ok

Peugeot 407 2006 BSI dash OK
Q7 2007 OK
Antara OK fuel pump via carprog OK
Find all posts by this user
Quote this message in a reply
22-01-2014, 02:54 AM
Post: #36
RE: DIGIPROG 3 user help thread !
I'm experiencing some problems wtih Honda civic ep3 (1.7cdti) from 2004 european model.
Digiprog reads the chip, and showing the right km's that I have entered. But when I put the odometer back in the car, the screen on the gauge cluster doesn't work... it's just blank. I have bought another gauge cluster from the same model and it's working good. Now i'm thinking to copy the eeprom data from the working gauge cluster to my old gauge cluster, is that possible with the Digiprog?

I have followed the manual for the Honda, and in the manual there is also a second method to fix that by puttin the wires... but the colors don't match worried

Sorry for my bad English tongue hopefully somebody would help me a bit tongue
Find all posts by this user
Quote this message in a reply
22-01-2014, 08:42 AM
Post: #37
RE: DIGIPROG 3 user help thread !
Later you modified casand tacho the keys change stored km
Find all posts by this user
Quote this message in a reply
 Thanks given by: P206gti
22-01-2014, 21:03 PM
Post: #38
RE: DIGIPROG 3 user help thread !
Hi Guys!
Why is it so difficult to get a digiprog update like 4.88 or 4.92?
Is there any board, forum or source where i get updates?
Why is it only possible to buy updates?
Why did updates only work with the Serial No. of the digiprog?


sorry, but i dont understand why it istn easy to get updates...
Find all posts by this user
Quote this message in a reply
22-01-2014, 21:34 PM
Post: #39
RE: DIGIPROG 3 user help thread !
(22-01-2014 21:03 PM)tridh Wrote:  Hi Guys!
Why is it so difficult to get a digiprog update like 4.88 or 4.92?
Is there any board, forum or source where i get updates?
Why is it only possible to buy updates?
Why did updates only work with the Serial No. of the digiprog?


sorry, but i dont understand why it istn easy to get updates...

Now i ask you somethink, when you make km corection on a car, do you make it always for free ?
Nobody work for free wink2

Remapping EcoTuning Dpf Egr Dtc Remove Immo Off Airbag Repair
KESS V2 Car Bike & FGTech V54 & SMOK & DIGIPROG III YH V4.94....

Stop worrying about what can go wrong, and get excited about what can go right.
PRESS THANKS IF YOU LIKE MY POST AND IT HELPED YOU evilgrin
Find all posts by this user
Quote this message in a reply
23-01-2014, 09:27 AM
Post: #40
RE: DIGIPROG 3 user help thread !
I get many of the sofware like etka,elsa,wis,xentry for "free"...
I pay for the digiprog and the cables...
But the price for update about 300 USD for 4.88 is to high, for 300 USD i get a new digiprog...
Is the digiprog Community to small ?
Where did the sellers get the updates from?
Pay about 50-100 USD for the 4.88 or 4.92 is ok, but not much more...
Find all posts by this user
Quote this message in a reply
Post Reply 


Bookmarks

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
HCadillac Digiprog 2008 Cadillac CTS in Pculvert 1 44 Yesterday 00:48 AM
Last Post: Clusters
YTMercedes W176 digiprog 3? in Wolfxam 8 177 16-10-2017 15:56 PM
Last Post: Wolfxam
0Dash X-tool suppot/Feedback thread in volavka 110 16,172 16-10-2017 13:27 PM
Last Post: km666
  Smok UHDS Support/Feedback Thread in volavka 22 2,247 14-10-2017 00:37 AM
Last Post: pietje001
0Dash MTool Mileage Correction suppot/Feedback thread in volavka 18 2,571 30-09-2017 03:30 AM
Last Post: juancho18
0Dash IProg+ suppot/Feedback thread in volavka 123 32,959 10-08-2017 10:52 AM
Last Post: Audis
ZSeat Digiprog Clone V04.88M/150113 with Seat Ibiza 2010 in Master_Heinrich 8 371 01-08-2017 12:08 PM
Last Post: Master_Heinrich
XZBMW Digiprog correction on 2014 BMW X5 f15 in Pculvert 10 680 27-07-2017 14:48 PM
Last Post: Pculvert
VToyota Digiprog 07-08 sequoia? in Pculvert 3 211 24-07-2017 19:03 PM
Last Post: Pculvert
MChevrolet Digiprog mileage correction 2016 Tahoe? Help in Pculvert 3 298 11-07-2017 04:48 AM
Last Post: Clusters

Forum Jump:


User(s) browsing this thread:
3 Guest(s)

Return to TopReturn to Content