Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Alpina D5 Gearbox Software
18-08-2017, 05:59 AM,
Post: #31
|
|||
|
|||
RE: Alpina D5 Gearbox Software
Mine is remapped too - 315hp/620nm, with downpipe.
I'm just asking, my current EGS firmware is running just fine. |
|||
18-08-2017, 08:16 AM,
Post: #32
|
|||
|
|||
RE: Alpina D5 Gearbox Software
Will this also work on F10 528i FR13 N52B30O2 190kW Rear-Wheel Drive left USA?
and F10LCI 528i XG53 N20B20O0 180kW Rear-Wheel Drive left USA? Thank's Setubal-Portugal
|
|||
18-08-2017, 13:13 PM,
Post: #33
|
|||
|
|||
RE: Alpina D5 Gearbox Software
Does anyone know if it's possible to do this same procedure to install Alpina sw on EDC suspension?
|
|||
18-08-2017, 14:09 PM,
(This post was last modified: 18-08-2017, 14:15 PM by hulahans.)
Post: #34
|
|||
|
|||
RE: Alpina D5 Gearbox Software
Maybe, takes 5 minutes to check, use the alpina fa and make a measurement plan, if hwel hwap is black should be fine
Make a scr and load it up if you test it |
|||
18-08-2017, 15:00 PM,
Post: #35
|
|||
|
|||
RE: Alpina D5 Gearbox Software
(17-08-2017, 11:54 AM)BusyBox Wrote: Just to make sure, will this also work on F10 530d with 258hp engine version? (17-08-2017, 12:29 PM)mr_nitroz Wrote: Busybox: Yes, it will. (18-08-2017, 14:09 PM)hulahans Wrote: Maybe, takes 5 minutes to check, use the alpina fa and make a measurement plan, if hwel hwap is black should be fine Pretty sure Hulahans is right here and mr_nitroz is mistaken. Busybox your screenshot TAL calculation indicates a HWEL (hardware/ECU) upgrade, so I think it's highly unlikely you would be successful. If this post helped you in anyway please use the thanks and/or REP buttons down here. Thanks!
|
|||
18-08-2017, 17:49 PM,
Post: #36
|
|||
|
|||
RE: Alpina D5 Gearbox Software
|
|||
18-08-2017, 20:15 PM,
Post: #37
|
|||
|
|||
Alpina D5 Gearbox Software
|
|||
18-08-2017, 20:25 PM,
(This post was last modified: 18-08-2017, 20:28 PM by hulahans.)
Post: #38
|
|||
|
|||
RE: Alpina D5 Gearbox Software
You have not used alpina fa including 920 9xa,or wrong time criteria, this are the normal swfl flash upgrades because CDD_xxx in both ist and soll.
In alpina it should have other letters in front And for sure informations about the car manual/automatic etc. or better i do that for you via tv |
|||
18-08-2017, 20:28 PM,
Post: #39
|
|||
|
|||
Alpina D5 Gearbox Software
(18-08-2017, 20:25 PM)hulahans Wrote: You have not used alpina fa including 920 9xa,or wrong time criteria, this are the normal swfl flash upgrades because CDD_xxx in both ist and soll. I've changed VO adding 920 and 9XA to SALAPA elements and changed production date to 1211. Wrote it to VCM and after performed TAL calculation. Have I done anything wrong? |
|||
18-08-2017, 20:30 PM,
(This post was last modified: 18-08-2017, 20:31 PM by hulahans.)
Post: #40
|
|||
|
|||
RE: Alpina D5 Gearbox Software
You have to write abolutely nothing in vcm, time criteria should be wrong too
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
4 Guest(s)
4 Guest(s)
Return to TopReturn to Content