[AmineBen1992]

Hello to all,

Today i've done dpf Off to Golf6 2008 ECU EDC17CP14 With ADS 2017 Software, The car work Fine but after 15min of driving the glow plug lamp go on, i read DTC and get P2196 and P246E

I Remove ECU and tryed AVDI Solution but the same result, the lampe comes on but car run perfect

Could someone give me good solution for DPF or remove This DTC Please

ECU Info :
-EDC17CP14
-03L9060322FL
-03L906022G
-0281015420

Many Thanks

[Stig33]

Hello to all,

Today i've done dpf Off to Golf6 2008 ECU EDC17CP14 With ADS 2017 Software, The car work Fine but after 15min of driving the glow plug lamp go on, i read DTC and get P2196 and P246E

I Remove ECU and tryed AVDI Solution but the same result, the lampe comes on but car run perfect

Could someone give me good solution for DPF or remove This DTC Please

ECU Info :
-EDC17CP14
-03L9060322FL
-03L906022G
-0281015420

Many Thanks

Try this and report....

Pass sent in p.m.

[rasmoka]

You have to read ECU on boot mode.

[kh1715m]

TRY THIS AND REPORT
PASS PM ME
if i helped you dont forget thanks and rep+

[rasmoka]

Try this file, dont forget CS

[konstantin]

Here 100% tested many times solution without problems now if you have problem with oxygen sensor you must replace it.Also for egt sensor check harness

[AmineBen1992]

Solved Thanks to all.