[ASSE50]

Hi Guys,

I´ve bought a X3F25 where the ODO has been set to 0 at a "normal" ODO of 140000.
Now the dash (without any tamper dot or eq) came to approx 37000. I want to go now upwards in all ECU`s to the "real 177000. What is the easiest way to do this?


Thanks for your suggestions



ASSE

[Diagnostix]

At LAST! someone who want mileage re-calibration for a legitimate reason.

Hopefully Clusters can help you with this.

[Clusters]

At LAST! someone who want mileage re-calibration for a legitimate reason.

Hopefully Clusters can help you with this.

I don't do Euros at all, so I have no idea.

[Diagnostix]

Thought the US and Canada were full of BMWs.

[pietje001]

Yes, there are lots of beamers and benzes. But these are much different from USA cars in a technical way.


Change 160dwq to new mileage. Fem module + keys will automatically take new mileage.

For other locations I think best to use BMW cleaner. But it's quite expensive.
Personally I would only change above.

---

Yes, there are lots of beamers and benzes. But these are much different from USA cars in a technical way.


Change chip 160dwq in dash to new mileage. Fem module + keys will automatically take new mileage.

For other locations I think best to use BMW cleaner. But it's quite expensive.
Personally I would only change above.
(And if someone rolled back the mileage and you want to restore it to original, it's a big change ecu is still at original value, since only very few people change it in ecu)

[temsky740]

Set mileage to zero in kombi and it will take mileage from cas (there is no FEM in f25). and take a look in CAS, may be u will see there can filter