Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Golf5 Visteon dash adaptation
30-07-2017, 14:56 PM,
Post: #1
|
|||
|
|||
Golf5 Visteon dash adaptation
Hello guys..I have a golf5 2007+ wich need new dash to be adapted..The problem is I dont have old dash.I made immo off in ecu but "safe" warning is present now...is any chance to code new dash I try recode keys with new pin from dash but unsucesfuly...or make immo off without safe on dash?thanks advanced
|
|||
30-07-2017, 20:23 PM,
(This post was last modified: 30-07-2017, 20:24 PM by CHIKODIAG.)
Post: #2
|
|||
|
|||
RE: Golf5 Visteon dash adaptation
Hi
read the org pin from ecu and read the new pin from the dash thene use vcds and adapte your new dash the saef warning will be ON if you dont have a keys programed in dash good luck |
|||
30-07-2017, 20:41 PM,
(This post was last modified: 30-07-2017, 20:49 PM by rs@chip.)
Post: #3
|
|||
|
|||
RE: Golf5 Visteon dash adaptation
(30-07-2017, 20:23 PM)CHIKODIAG Wrote: Hi I try this with rosstech but dash wont acept pin...I have 100% corect pin becouse I read with fvdi and external load eep to soft same pin..here is my ecu and new dash dump. can anyone calc cs from ecu I will try change pin and cs in dash |