Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Remove CCC from ISTA-D module tree
26-10-2017, 16:15 PM,
(This post was last modified: 26-10-2017, 16:57 PM by Nixer.)
Post: #21
|
|||
|
|||
RE: Remove CCC from ISTA-D module tree
(26-10-2017, 15:43 PM)hojo29 Wrote: I would delete times 609 and 6VA from the FA. will try that..but I believe I need at least 6VA for CiC to be recognized. W 609 NAVIGATION CCC //63+!667] NAVIGATIONSSYSTEM PROFESSIONAL ?Risiko: nur mit SA 676 oder 677 will try and update. Removing SA609 didn't help. When I launched ISTA-P, it reported that few modules including CIC and CID were found but the vo doesn't have corresponding entries. |
|||
26-10-2017, 19:32 PM,
Post: #22
|
|||
|
|||
RE: Remove CCC from ISTA-D module tree
Afaik i-level needs to be updated in cas&frm.. Read it a while ago.. istufe_lessen and istufe_scrieben
hope it helps.. |
|||
26-10-2017, 20:27 PM,
(This post was last modified: 26-10-2017, 20:28 PM by Nixer.)
Post: #23
|
|||
|
|||
RE: Remove CCC from ISTA-D module tree
I updated the factory I-level to something newer like E89x-09-09-500 and E89x-09-03-500....then ISTA-P shows errors on almost all modules including Junction box, FZD, Kombi etc..but ISTA-D shows no errors and displays the modules tree correctly.
(07-08-2017, 12:52 PM)sebastianfernandes Wrote: Don't know if it will work... Just to make it short, delete your previous scans/sessions in ista-d with that vin. Maybe it is stored on the computer.. try it you have nothing to loose.. Tried this as well... ISTA-D has no issues showing the correct modules if I updated the factory I-level...ISTA-P is the trouble. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content