Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Kess V2 useless clone?
|
16-07-2017, 14:09 PM,
(This post was last modified: 16-07-2017, 15:27 PM by Mex165.)
Post: #1
|
|||
|
|||
|
Kess V2 useless clone?
So, i got some "help" from a not so helpful troll on another forum, so i´ll try here as I now don´t have a clue on what I really need to "upgrade" on this.
I have those 6 murata filters and the speaker that I know is correct, just need to exhange them on the board. If this clone is just crap, i´ll just trash this one and buy something better. The SI9243 and some other parts i bought are not something I can use on my Kess V2 board!?!? Thanks in advance for any help you can spare 
|
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
16-07-2017, 16:36 PM,
Post: #2
|
|||
|
|||
|
RE: Kess V2 useless clone?
All transistors i would replace
filters remove the ones on pcb and replace with murata ones then run a wire across all middle parts of the murata filters and conect to gnd if my post helps please give Reputation
 and Thanks |
|||
|
|
|
16-07-2017, 16:59 PM,
Post: #3
|
|||
|
|||
|
RE: Kess V2 useless clone?
|
|||
|
|
|
04-08-2017, 04:55 AM,
Post: #4
|
|||
|
|||
|
RE: Kess V2 useless clone?
What do I need upgrade on this board to be able to read/write DSG via OBD?
On Passat with DQ250, reading through OBD should work with 4.036 and 2.08? |
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
