[sev45]

Hi all, download and test a new version.

Extract the archive to the folder "program files". If the program does not start - first install the previous version, after replace 3.41.30

[hulahans]

Do you mean first install your 3.41.10 patched version including dll and license.
And then only delete the folder Rheingold and copy new Rheingold 3.41.30 Folder to programm files?
Or dou you mean deinstall 3.41.10 and copy new one to programm files.
I tryed different ways but don t work good, only main page is shown but cannot search for vin or anything else.

[beemerboy88]

Do you mean first install your 3.41.10 patched version including dll and license.
And then only delete the folder Rheingold and copy new Rheingold 3.41.30 Folder to programm files?
Or dou you mean deinstall 3.41.10 and copy new one to programm files.
I tryed different ways but don t work good, only main page is shown but cannot search for vin or anything else.

1. Install 3.41.10 and install the patch. Run it and make sure it loads up correctly. Then close it.

2. Right click on "Rheingold_41.30.part1.exe" and run as administrator (will take a while to start). Install wizard should then start (is in Russian but it should be easy to follow).

3. Browse and change install path to c:\program files(x86)

4. Overwrite existing files when prompted (yes to all - top middle button).

Works. Tested ok with k+dcan.

[thirdy]

What's the difference between 3.41.10 and 3.41.30?

[hulahans]

@beemerboy
Description don t work for me

Installed first 3.41.10 with dll and license xml so that it worked properly,
After extracting the way you described i started 3.41.30

First i got network connection error at start and i couldn t search for vin or anything else.And in istap the database and the Rest were shown as Version 3.41.10 as before

[mattydr67]

Mate
First install ISTA P 3.41.10
Then extract ISTA P 3.41.30 files in a separate folder (using winrar in other folder someother place)
Then you have to overwrite entire Rheingold folder ( using copy paste ) from where you extract 3.41.30 to the C:\Programs Files\Rheingold
I haven't a car to test now but the system has no error for the moment
You can try
Good luck

[fredy3330]

HI, I DOWNLOADED, UNZIPED AND RUNNING DIRECT FROM EXTERNAL DISK.
(OF COURSE BMW TOOLS 2.12 INSTALLED AT LAPTOP).
THANK YOU

[23Andi23]

HI, I DOWNLOADED, UNZIPED AND RUNNING DIRECT FROM EXTERNAL DISK.
(OF COURSE BMW TOOLS 2.12 INSTALLED AT LAPTOP).
THANK YOU

Friend welcome to Garage Automotive

First off all >>READ THE RULES<<

Then your first post should be >>HERE!!<<

[hulahans]

Mate
First install ISTA P 3.41.10
Then extract ISTA P 3.41.30 files in a separate folder (using winrar in other folder someother place)
Then you have to overwrite entire Rheingold folder ( using copy paste ) from where you extract 3.41.30 to the C:\Programs Files\Rheingold
I haven't a car to test now but the system has no error for the moment
You can try
Good luck

That was the first solution i have already tryed.
Hmm, do you have installed before on 3.41.10 rheingoldcorefarmework.dll and license.xml or only the dll?
I have installed both on 3.41.10,don t think that could be the problem but maybe i am wrong and 3.41.30 don t like one of them

[adamzg]

What are the languages is Polish??