Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

How to C4 lan/wifi settings
14-08-2017, 09:30 AM,
Post: #1
How to C4 lan/wifi settings
Can someone pls advise on this as tried entering some ip's found on youtube but still no joy

Os win 7 pro x32


Regards
Quote this message in a reply
[+] 2 users say Thank You to teerak2uk for this post
15-08-2017, 07:21 AM,
Post: #2
RE: How to C4 lan/wifi settings
Hey,

First you have to change LAN Network adapter settings to:
Use the following address: 172.29.127.119.

Quote:Note down the SSID, security type, encryption type and the key of the ad-hoc network.
Disconnect your connection to any wireless network and switch off/disable your wireless device. Turn on/enable your wireless device but don't connect to any network.
Click on the network icon in the taskbar.
Click Open Network and Sharing Center > Manage Wireless Networks > Add.
Click "Manually create a network profile". (This may look silly but we really are going to create an infrastructure network now.)
Enter the network name (SSID), security type, encryption type (if any) and the key that you noted in step 1.
Uncheck both checkboxes ("Start this connection automatically" and "Connect even if the network is not broadcasting".) [Note that you cannot have the connection start automatically. If you try to have it checked, step 10 will fail. A different way to start it automatically during system boot is described below.]
Click Next > Close. Your connection must appear in the list with the icon suggesting infrastructure (two big screens connected to a tube). Don't worry about it.
Click Start, type in "cmd" in the search box, press Enter.
In the Command Prompt, type in "netsh wlan set profileparameter name=NetworkName ConnectionType=IBSS", exactly as shown, without quotes, except you must substitute NetworkName with the SSID (network name) of your ad-hoc network.
If everything went well, you'll see that the icon has now changed to an ad-hoc icon (three small screens connected to each other) in the Manage Wireless Networks window.
Turn on/enable your wireless device, and try connecting to the Ad-hoc network. You will notice that you no longer need to enter the network key.

To automatically connect to a saved ad-hoc network during Windows boot (can be applied to both guest and host computers running Windows 7)

Click Start > point to All Programs > right-click Startup > click Open. (You may choose Open All Users instead if you prefer).
Right-click an empty space and click New > Shortcut.
Type in "netsh wlan connect NetworkName". Once again, NetworkName must be substituted with the SSID of your ad-hoc network.
Click Next and enter a fancy name such as "Connect to NetworkName" or something like that.
Click Finish and you're done. This shortcut will run when Windows starts up, giving you a very brief flash of the black command window, followed by your computer connecting to the ad-hoc network if it is available. Tip: You can also pin the shortcut in your taskbar or copy it to the desktop to easily connect to the network any time you want.

After this change your Wireless adapter setting to: 192.168.2.???
See your MUX Ip & Use last number as next of your Ip`s number of mux,
For example Mux says: 192.168.2.221, then you input to your adapter setting like;
192.168.2.220.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Xentry 09/12.2021 WIFI Solution gcs190 11 4,807 29-02-2024, 13:33 PM
Last Post: gcs190
YTMercedes XDOS 2021.12.4 (Win11Pro)+HHT(native)+full software+WiFi (Acronis 2021) UPD 2.02.2022 motorotor 52 11,880 27-05-2023, 05:45 AM
Last Post: ocostel
  Xentry Sd Connect Windows 10 wifi problem donjuan020 6 591 01-02-2023, 17:03 PM
Last Post: DBCT
  help SDConnect wifi 2009mohrice 1 376 27-09-2019, 06:13 AM
Last Post: DBCT
YTMercedes Can't gain WiFi connection to C4 on WIN10 FatMama 4 753 17-08-2019, 17:46 PM
Last Post: W211
  ecom settings alexbenz 4 669 26-04-2019, 09:13 AM
Last Post: cucuro
  Problem with wifi "C4" windows_10 64bit bereja 2 635 11-12-2018, 10:37 AM
Last Post: ross2018
YTMercedes Xentry not connecting to SDconnect C4 over WiFi ACK 6 2,665 28-04-2018, 00:43 AM
Last Post: ACK
  C4 wifi setting tar25fr 1 720 10-01-2017, 09:19 AM
Last Post: tar25fr
  Xentry openshell 092016 error on settings Gatsby79 8 2,596 16-10-2016, 07:19 AM
Last Post: AutoExe3219

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content