[temsky740]

Check kmm_SG in daten files it shoulld be written which CAS versions goes with elv and which not and ofcourse you will find needed zusb

And of couse u will do nothing with your needed zusb...
Because if u did such procedure even one time in your life, then u would not write such fairytales))

---

Check kmm_SG in daten files it shoulld be written which CAS versions goes with elv and which not and ofcourse you will find needed zusb

CAS 3 could be without EVL not CAS 2. But thx any way.

---

If we do anything on PM then nobody else can learn

Unfortunately even via pm no solution for CAS 2 founded eat

But u thought i would tell u desigion about cas2 and u write it here ))) Dont be so shine. Especially after our conversation, in which i was like a fool for the moment that i get to know what is going on )))

[krug]

I need to disable EVL on CAS 2 not in a car, I have made a little box cas2 + key + JBE to work on bench with BMW modules. Set come off from e87 with EVL I haven't got EVL in my set up so I unable to code some of the modules on bench because is no kl_15. So I want to disable EVL to get kl_15 without EVL. A have spoken to temsky740 about my problem best solution for CAS2 is EVL emulator( but price of emulator to high) I got CAS3 with key so I would be flashing my CAS 3 to non EVL zb and swapping with CAS 2. Thx to temsky740

[temsky740]

Once more, Krug ! There is a method WITHOUT EMULATOR to do cas2 and forget about elv , but not in your case , because u dont have enough equipment

[16eddi67]

Hier you dump ca2 without elv passw PM

BR EDDY

[Andy1989]

Hier you dump ca2 without elv passw PM

BR EDDY

CAS 2 OR 3 ? Thank you !