[Silva1337]

Hello guys i got problem with dashboard, rewrited chip as always used 000 on first 2 lines and on VIN , but when im trying to code using ncsexpert i get error coapi-2060 where could be problem? I can flash it , and read it.
If something matters it had some oxidation i cleaned pcb , but everthing wokirng , car is prefl and dash from fl model, tryed to change VO date, ssd file, ista-p , icom
could original eeprom from prefl dash work on fl dash if i change it?

[doordie40]

Hi
2 line type 00
and type Vin number last 7 from CAS

[krug]

Hello guys i got problem with dashboard, rewrited chip as always used 000 on first 2 lines and on VIN , but when im trying to code using ncsexpert i get error coapi-2060 where could be problem? I can flash it , and read it.
If something matters it had some oxidation i cleaned pcb , but everthing wokirng , car is prefl and dash from fl model, tryed to change VO date, ssd file, ista-p , icom
could original eeprom from prefl dash work on fl dash if i change it?

Hi Silva1337.
Vin number have to set to FFFFFFF NOT TO 0000000. Then just code with Ncsexpert it would be enough and before coding update data files in Ediabas and Ncsexpert. Use " coding tool " is really easy to update files with it. If you want I can give you a hand via teamviewer.

[Silva1337]

Okay i will try change vin to FFFFFFF or ORG VIN and test , i know how tu use ncs
always before used 0000000 mhm

[krug]

Okay i will try change vin to FFFFFFF or ORG VIN and test , i know how tu use ncs
always before used 0000000 mhm

YOU need set vin to FF don't write original vin. Good luck

[Silva1337]

Okay i will try change vin to FFFFFFF or ORG VIN and test , i know how tu use ncs
always before used 0000000 mhm

YOU need set vin to FF don't write original vin. Good luck

Im just curiuos why, can you tell reason?

[krug]

Okay i will try change vin to FFFFFFF or ORG VIN and test , i know how tu use ncs
always before used 0000000 mhm

YOU need set vin to FF don't write original vin. Good luck

Im just curiuos why, can you tell reason?

Because FF works all the time 100%
Any way did it work for you ?

[Silva1337]

Okay i will try change vin to FFFFFFF or ORG VIN and test , i know how tu use ncs
always before used 0000000 mhm

YOU need set vin to FF don't write original vin. Good luck

Im just curiuos why, can you tell reason?

Because FF works all the time 100%
Any way did it work for you ?

i will report when finish it, dont have near me programmer orange now.