Possibly Related Threads…

***sixcode*** · 03-10-2017, 11:48 AM,

(03-10-2017, 11:44 AM)chrislawton Wrote:
(03-10-2017, 11:27 AM)sixcode Wrote:
(03-10-2017, 11:20 AM)szabx Wrote:
(03-10-2017, 10:25 AM)kwork Wrote:
(03-10-2017, 09:45 AM)sixcode Wrote: No... buy this.. its ICOM next

I recommend this for F model.
If you also have E model,I think ICOM clone is better.
for my experience.

I've got F model.
original is not cheap

well... if you fu#k up a car with a clone device you wish you did have bought the original one...

not saying that EVERY clone is bad.... only its hard to get the good one in my opinion

This forum is about clone devices!

thats your opinion....

***willisodhiambo*** · 03-10-2017, 11:53 AM,

(03-10-2017, 11:27 AM)szabx Wrote:
(03-10-2017, 10:13 AM)robertbeam26 Wrote: I have Rheingold 4.07.13 Standalone full .if u need

I used Rheingold 4.07.13 Standalone full + E-NET cable. I try update my F11.

Can ENET really carry out software update from within ISTA+? Firewall off and antivirus off?

I have seen this problem before but never bothered too much because I also have ICOM and ISTAP. Will re-test today evening and report.

***Twoone*** · 03-10-2017, 13:02 PM,

(03-10-2017, 11:53 AM)willisodhiambo Wrote:
(03-10-2017, 11:27 AM)szabx Wrote:
(03-10-2017, 10:13 AM)robertbeam26 Wrote: I have Rheingold 4.07.13 Standalone full .if u need

I used Rheingold 4.07.13 Standalone full + E-NET cable. I try update my F11.

Can ENET really carry out software update from within ISTA+? Firewall off and antivirus off?

I have seen this problem before but never bothered too much because I also have ICOM and ISTAP. Will re-test today evening and report.

No!!! For ISTA+ to do coding or programming you need ICOM , ENET doesn't work!

***szabx*** · 03-10-2017, 14:17 PM,

Thank you for your answers!

***Ecutech*** · 03-10-2017, 14:20 PM,

(03-10-2017, 13:02 PM)Twoone Wrote:
(03-10-2017, 11:53 AM)willisodhiambo Wrote:
(03-10-2017, 11:27 AM)szabx Wrote:
(03-10-2017, 10:13 AM)robertbeam26 Wrote: I have Rheingold 4.07.13 Standalone full .if u need

I used Rheingold 4.07.13 Standalone full + E-NET cable. I try update my F11.

Can ENET really carry out software update from within ISTA+? Firewall off and antivirus off?

I have seen this problem before but never bothered too much because I also have ICOM and ISTAP. Will re-test today evening and report.

No!!! For ISTA+ to do coding or programming you need ICOM , ENET doesn't work!

But the internet is awash with people using ISTA/P and an ENET cable to code and program???

***inspi1981*** · 03-10-2017, 15:19 PM,

ISTA-P and ENET work with loader
ISTA-D and ENET-only for diag, not for programming and coding, possible only with ICOM
It was mention 1000 times

***Ecutech*** · 03-10-2017, 15:34 PM,

(03-10-2017, 15:19 PM)inspi1981 Wrote: ISTA-P and ENET work with loader
ISTA-D and ENET-only for diag, not for programming and coding, possible only with ICOM
It was mention 1000 times

Just what I thought. ISTA P with the loader codes and programs with the ENET cable.

ISTA D and the ENET cable only diag.

So as long as you have ISTA D/P and an ENET cable you dont need an Icom.

There is so much mis information posted here that it's very hard for someone trying to get to grips with ISTA to get correct answers.

***weby*** · 03-10-2017, 17:24 PM,

Use e-Sys for updating your i-Stufe!

***szabx*** · **RE: BMW flash with Rheingold 4.07.13 Standalone**

(03-10-2017, 15:34 PM)chrislawton Wrote:
(03-10-2017, 15:19 PM)inspi1981 Wrote: ISTA-P and ENET work with loader
ISTA-D and ENET-only for diag, not for programming and coding, possible only with ICOM
It was mention 1000 times

Just what I thought. ISTA P with the loader codes and programs with the ENET cable.

ISTA D and the ENET cable only diag.

So as long as you have ISTA D/P and an ENET cable you dont need an Icom.

There is so much mis information posted here that it's very hard for someone trying to get to grips with ISTA to get correct answers.

I use DIAG and coding ISTA D/P and E-sys with E-NET. Just I'd like sofware update .

THX

(03-10-2017, 17:24 PM)weby Wrote: Use e-Sys for updating your i-Stufe!

How can I update I-stuf with E-SYS?

***ReDFiRe*** · 06-10-2017, 05:20 AM,

I updated my car (e60) with k-dcan cable and ISTA/P ,updated e53 too without any problems.

Изпратено от моят Redmi Note 2 с помощта на Tapatalk

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	ISTA Standalone Licenserequest up to v4.37.4x	Sedoy	8,711	669,019	48 minutes ago Last Post: Sedoy
	ista 4.46 Standalone	kiranabc	84	10,649	Yesterday, 13:18 PM Last Post: kiranabc
	Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA	FSCmap	184	53,421	24-04-2024, 14:49 PM Last Post: Bag3ban1
	Flash CAS 3 for disable ELV	UnFan	3	211	19-04-2024, 08:20 AM Last Post: ravager
	Flash MPPK software 20D B47 (Esys)	ruben_17non	5	583	10-04-2024, 21:38 PM Last Post: ruben_17non
	BMW G8x M3/M4 CSL EGS flash	weby	22	3,656	31-03-2024, 19:48 PM Last Post: Erezbmwm
	m2 g87 csl flash	Erezbmwm	0	136	31-03-2024, 18:46 PM Last Post: Erezbmwm
	CCC flash WINKFP ICOM	BimmerSLO	9	373	29-03-2024, 19:17 PM Last Post: Hoborg
	BMW ISTA-P Rheingold 69.0.200 (Torrent File)	carsoftcare	1	245	26-03-2024, 12:09 PM Last Post: hlip
	E84 X1 25d with 8hp45x how to flash Alp*na or other EGS	hasn38	0	118	23-03-2024, 00:26 AM Last Post: hasn38

Contact Us