[makisgeorge2]

I read carefully this topic and search over the internet but I can't disable/remove dtc 01044 - Control Module Incorrectly Coded
and 18034 Powertrain data bus: Missing message from tcu
pls someone dtcs off (disable)this two FAULT CODES.

[persix]

Its car whis automatic gearbox? Sounds like incorect coded ECU. Use VCDS and code block.

[makisgeorge2]

Its car whis automatic gearbox? Sounds like incorect coded ECU. Use VCDS and code block.

yes you have right,how can i use vcds to block this codes?
regards

[persix]

Hi.

Use VCDS ang go tu Engine -> coding and change 0001 to 0002. And Can gateway also need changes.

CAN-bus gateway>coding
0 - No available equipment
+1 - Automatic Transmission
+2 - ABS Brakes
+4 - Airbags

If You have 0007 then You need 0006.

[makisgeorge2]

Hi.

Use VCDS ang go tu Engine -> coding and change 0001 to 0002. And Can gateway also need changes.

CAN-bus gateway>coding
0 - No available equipment
+1 - Automatic Transmission
+2 - ABS Brakes
+4 - Airbags

If You have 0007 then You need 0006.

No luck.

[persix]

Did You change encoding in Engine ECU too? Can You take some screen from ECU.

[makisgeorge2]

Did You change encoding in Engine ECU too? Can You take some screen from ECU.

It Works!!!!thanks My friend!!!!