Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
How to flash used DME module in 2016 M3?
24-08-2017, 05:17 AM,
Post: #1
|
|||
|
|||
How to flash used DME module in 2016 M3?
Hello
I've got M3 2016 where DME has been stolen and I've got DME from m4 car 2014 which is the same. ISTA-P see the module but it recognize that Is from the different car. Anyone know how it can be coded to work with this M3?? Thanks |
|||
24-08-2017, 05:47 AM,
Post: #2
|
|||
|
|||
RE: How to flash used DME module in 2016 M3?
HI,
with BMW standard tools not possible, VIN must be changed and the engine immobilizer will be a problem, too. Thorsten |
|||
24-08-2017, 06:50 AM,
Post: #3
|
|||
|
|||
RE: How to flash used DME module in 2016 M3?
You must change isn to correct > engine work, change vin > can ista flash, without change vin, you can flash via esys/autohex
|
|||
26-08-2017, 23:52 PM,
Post: #4
|
|||
|
|||
RE: How to flash used DME module in 2016 M3?
As i am not mistaking this DME is also protected with a FSC code, i got a 2016 M3 in my workshop some months ago and i see that there was a FSC code in the DME also.
Not know if this also i with your car, but maby it will help you. My friend told that the FSC files are for tuning files which you can buy from BMW directlly in state of chiptuning. |
|||
27-08-2017, 18:43 PM,
Post: #5
|
|||
|
|||
RE: How to flash used DME module in 2016 M3?
Hi,
The FSC what you saw on the M3, was for competition package. Thorsten |
|||
27-08-2017, 19:41 PM,
Post: #6
|
|||
|
|||
RE: How to flash used DME module in 2016 M3?
Intresting thred can you show us which ecu exactly is this? I think only autohex/explorer will do the yob..but keep us tuned mate
|
|||
28-08-2017, 06:18 AM,
Post: #7
|
|||
|
|||
RE: How to flash used DME module in 2016 M3?
Nearly every chiptuning tool can do that. You just have to find vin and isn in dump and change it.
|
|||
28-08-2017, 11:40 AM,
Post: #8
|
|||
|
|||
RE: How to flash used DME module in 2016 M3?
Hi,
You have to rewrite ISN number. DME, ESG (ECU from gearbox) and CAS are "connected" together by ISN number. This is kind of uniqe number, something like PIN. First you should copy ISN from previous DME and then you can write ISN to new DME by Autohex II or BMW-Explorer software. Please use youtube and put "write or read ISN to DME" in youtube. If You don't have prevoius DME then you have to write ISN from DME to CAS and gearbox ECU. I don't know what is the name of gearbox ECU if you have DKG. As i know there are two softwares which can do that by OBD cable without opening DME. This is as I wrote: BMW-Explorer and Autohex II. good luck. |
|||
29-08-2017, 11:08 AM,
Post: #9
|
|||
|
|||
RE: How to flash used DME module in 2016 M3?
|
|||
29-08-2017, 11:20 AM,
Post: #10
|
|||
|
|||
RE: How to flash used DME module in 2016 M3?
Hm,
not tried, I think you must get the FSC to cars VIN from BMW... Thorsten |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content