Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F30 2016 ista/p error please help
25-08-2017, 17:19 PM,
Post: #1
|
|||
|
|||
F30 2016 ista/p error please help
F30 2016 ista/p error please help ista/p cant acces the car i use enet i dont know what is the problem
|
|||
26-08-2017, 07:06 AM,
Post: #2
|
|||
|
|||
RE: F30 2016 ista/p error please help
Enet-cable is very dangerous to use! Use Icom...
|
|||
27-08-2017, 18:30 PM,
(This post was last modified: 27-08-2017, 18:31 PM by PopDog.)
Post: #3
|
|||
|
|||
RE: F30 2016 ista/p error please help
Set Network Card where E-Net is plugged in to
IP: 169.254.1.1 Netmask: 255.255.0.0 Start Ista-P Loader -> E-Net Emulator wants ZGW IP -> look it up with C:\EDIABAS\Hardware\ENET\ZGW_SEARCH.exe Start Ista-P and open Settings In Setting you can set E-Net Direct Connection and Enter Direct IP of ZGW (lookup ZGW IP with C:\EDIABAS\Hardware\ENET\ZGW_SEARCH.exe) same as before I've done this with an F30 2012 Modell and everything got updated except Kombi / HU/Rad AMPT. For Kombi and HU you can use E-Sys. There is some solution with DHCP Server Program for ICOM to Flash with them with ISTA-P but I think it is not working with E-Net. Try first with this connection. If Kombi and HU failes, you can try this manual with e-net and ista-p. Please Report when it is working LINK If my answer helped to fix anything, then don't forget to give me some rep please!
|
|||
Reputation: +1 - iyade46 [+1] | |||
28-08-2017, 08:27 AM,
(This post was last modified: 28-08-2017, 08:29 AM by Shinoby.)
Post: #4
|
|||
|
|||
RE: F30 2016 ista/p error please help
(25-08-2017, 17:19 PM)iyade46 Wrote: F30 2016 ista/p error please help ista/p cant acces the car i use enet i dont know what is the problemConfigure Ediabas for ENET cable. (26-08-2017, 07:06 AM)snypertje Wrote: Enet-cable is very dangerous to use! Use Icom...
|
|||
07-09-2017, 17:25 PM,
Post: #5
|
|||
|
|||
RE: F30 2016 ista/p error please help
(27-08-2017, 18:30 PM)PopDog Wrote: Set Network Card where E-Net is plugged in to work very fine ISTA/P can see that car and take VO but another problem is the program can only acces the FEM module and cant see any other ecu !! i use ista P up to 2017 working fine and ista D can contact all the modules so what the problem can be please? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content