[spider80]

Standalone versions of ISTA-D and ISTA-P.
For ISTA-P Loader thanks to beemerboy88.
SQLiteDBs 4.07.12, including RU, EN, DE, OTHER.



For unpack archives use 7-zip 16.04 or higher.

All installed and ready to work.
ISTA-P work with old and new Loader from beemerboy88.
Instructions for installation, configuration and solution of possible errors, is located in the Tools folder (FAQ-RU.pdf and FAQ-EN.pdf).
In FAQ has been added settings for ENET cable.
To view pdf files, use Adobe Acrobat Reader DC.
Don't ask password from pdf files!!!!

Read carefully FAQ in Tools folder befor ask the questions !!!

ISTA-P - 130 GB
Service Data (SDP) - 87.1 GB
FASTA & HW check is off !!!

What's included in torrent:

[jamiem1987]

Do you know if the "not enough system resources" glitch as outlined in the ISTA D standalone thread (cured by replacing 2 files) is fixed in this version? Or will i need to replace these once i get this installed?

Thanks

[spider80]

Do you know if the "not enough system resources" glitch as outlined in the ISTA D standalone thread (cured by replacing 2 files) is fixed in this version? Or will i need to replace these once i get this installed?

Thanks

Fixed.

[Jazo116]

Thank you, I'll be seeding this for the next few days.

[aammjj]

For SDP 4.07.11 i get error message when i try to unpack it!
Does any have the same issue.
I downloaded it to times and no way!!!

Other questiones: Do you have Release information concerning this thread?
I german i would appreciate it!
Thanks in advance.
Rgds

[szabx]

Hi All!

I used ISTA + 4.02.30 and E-SYS.to Diag and coding with e-net cable. But I flashing my BMW F11. I get ista+ 4.05.23 with PSdZ and SQLliteDBs.
How can I change the new version?
I remove the old Rheingold folder copy the newest. Copy PSdZ and SQLliteDBs folder. Runing the ISTA-D Reg Fix x64.reg file.

The ISTA + is runing but when connect my car or write the VIN last 7 digit not working. No error message.

Can any help me?

THX
szabx

[spider80]

Hi All!

I used ISTA + 4.02.30 and E-SYS.to Diag and coding with e-net cable. But I flashing my BMW F11. I get ista+ 4.05.23 with PSdZ and SQLliteDBs.
How can I change the new version?
I remove the old Rheingold folder copy the newest. Copy PSdZ and SQLliteDBs folder. Runing the ISTA-D Reg Fix x64.reg file.

The ISTA + is runing but when connect my car or write the VIN last 7 digit not working. No error message.

Can any help me?

THX
szabx

Do U read FAQ ???

[Studie]

I have been seeding for some time, thanks for the upload Spider!

[haxigi]

Hello. Im downloading this 4 day. Could maybe someone seed this? Transfer speed is about 400kb/s

[BaggieMatt]

Hello. Im downloading this 4 day. Could maybe someone seed this? Transfer speed is about 400kb/s

There are 60 seeders so perhaps you should check the software at your end. Make sure you have DHT/peer exchange enabled.