[louis21]

V4.6.1 (2017-08-30)
* This version DON't need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.1 version in Doc folder
* Fix MC9S12XS/MC9S12XHY series PFLASH write error problem
* Fix SRS-VW52-V1 diagram
+ Add AT24C01(CLIP),AT24C02(CLIP), AT24C04(CLIP), AT24C08(CLIP), AT24C16(CLIP), AT24C32(CLIP),
AT24C64(CLIP),AT24C128(CLIP),AT24C256(CLIP), AT24C512(CLIP), AT24C1024(CLIP), AT25010(CLIP),
AT25020(CLIP),AT25040(CLIP),AT25080(CLIP),AT25160(CLIP),AT25320(CLIP),AT25640(CLIP),AT25128(CLIP),
AT25256(CLIP),AT25512(CLIP),AT93C06[A](CLIP),AT93C46[A](CLIP),AT93C56[A](CLIP),AT93C57[A](CLIP),AT93C66[A](CLIP),
AT93C76[A](CLIP),AT93C86[A](CLIP) options in<1-EEPROM&FLASH>-><ATMEL(CLIP)>(Need EEPROM CLIP ADAPTER)
+ Add CAT24C/W01(CLIP),CAT24C/W02(CLIP),CAT24C/W04(CLIP),CAT24C/W08(CLIP),CAT24C/W16(CLIP),CAT24C/W32(CLIP),
CAT24C/W64(CLIP),CAT25C128(CLIP),CAT25C256(CLIP),CAT93C46[A](CLIP),CAT93C56[A](CLIP),CAT93C57[A](CLIP),CAT93C66[A](CLIP),
CAT93C76[A](CLIP),CAT93C86[A](CLIP) options in<1-EEPROM&FLASH>-><CATALYST(CLIP)>(Need EEPROM CLIP ADAPTER)
+ Add XL[S]24C01(CLIP),XL[S]24C02(CLIP),XL[S]24C04(CLIP),XL[S]24C08(CLIP),XL[S]24C16(CLIP),XL[S]93C/LC06(CLIP),XL[S]93C/LC46(CLIP),
XL[S]93C/LC56(CLIP),XL[S]93C/LC66(CLIP) options in<1-EEPROM&FLASH>-><EXEL(CLIP)>(Need EEPROM CLIP ADAPTER)
+ Add FM24C02(CLIP), FM24C03(CLIP), FM24C04(CLIP),FM24C08(CLIP), FM24C09(CLIP),FM24C16(CLIP),FM24C17(CLIP),FM93CS06(CLIP),
FM93CS46(CLIP),FM93CS56(CLIP),FM93CS66(CLIP),NM24C02(CLIP),NM24C03(CLIP),NM24C04(CLIP),NM24C05(CLIP),NM24C08(CLIP),
NM24C09(CLIP),NM24C16(CLIP),NM24C17(CLIP),NM24U17(CLIP),NM24C32(CLIP),NM24C65(CLIP),NM93C06(CLIP),NM93C46(CLIP),
NM93C56(CLIP),NM93C66(CLIP),NM93C86(CLIP),NM93CS06(CLIP),NM93CS46(CLIP),NM93CS56(CLIP),NM93CS66(CLIP) options in
<1-EEPROM&FLASH>-><FAIRCHILD(CLIP)>(Need EEPROM CLIP ADAPTER)
+ Add 24AA02(CLIP),24AA04(CLIP),24AA08(CLIP),24AA16(CLIP),24AA164(CLIP),24AA32(CLIP),24AA128(CLIP),24AA256(CLIP),24C02(CLIP),
24C04(CLIP),24C32(CLIP),24LC02(CLIP),24LC04(CLIP),24LC08(CLIP),24LC16(CLIP),24LC164(CLIP),24LC32(CLIP),24LC64(CLIP),24LC65(CLIP),
24LC128(CLIP),24LC256(CLIP),93C/LC/AA46A(CLIP),93C/LC/AA56A(CLIP),93C/LC/AA66A(CLIP),93C/LC/AA76A(CLIP),93C/LC/AA86A(CLIP),
93C/LC/AA46B(CLIP),93C/LC/AA56B(CLIP),93C/LC/AA66B(CLIP),93C/LC/AA76B(CLIP),93C/LC/AA86B(CLIP),93C/LC/AA46C(CLIP),93C/LC/AA56C(CLIP),
93C/LC/AA66C(CLIP),93C/LC/AA76C(CLIP),93C/LC/AA86C(CLIP) options in<1-EEPROM&FLASH>-><MICROCHIP(CLIP)>(Need EEPROM CLIP ADAPTER)
+ Add M24C01(CLIP),M24C02(CLIP),M24C04(CLIP),M24C08(CLIP),M24C16(CLIP),M24C32(CLIP),M24C64(CLIP),M24C128(CLIP),M24C256(CLIP),
M24C512(CLIP),M93C06(CLIP),M93C46(CLIP),M93C56(CLIP),M93C66(CLIP),M93C76(CLIP),M93C86(CLIP),M95010(CLIP),M95020(CLIP),M95040(CLIP),
M95080(CLIP),M95160(CLIP),M95320(CLIP),M95640(CLIP),M95128(CLIP),M95256(CLIP),M95512(CLIP),ST24C01(CLIP),ST24C02(CLIP),ST24C04(CLIP),
ST24C08(CLIP),ST24C16(CLIP),ST24E16(CLIP),ST24E32(CLIP),ST24W02(CLIP),ST24W04(CLIP),ST24W08(CLIP),ST24W16(CLIP),ST25C01(CLIP),ST25C02(CLIP),
ST25C04(CLIP),ST25C08(CLIP),ST25C16(CLIP),ST25E16(CLIP),ST25E32(CLIP),ST93CS56(CLIP),ST93CS57(CLIP),ST93CS66(CLIP),ST93CS67(CLIP),ST93CS47(CLIP),
ST93CS46(CLIP) options in<1-EEPROM&FLASH>-><ST(CLIP)>(Need EEPROM CLIP ADAPTER)
+ Add X24C01(CLIP),
X5043(CLIP),
X5045(CLIP) options in<1-EEPROM&FLASH>-><ST(CLIP)>(Need EEPROM CLIP ADAPTER)
+ Add ME7.4.5-FLASH-ST10F275,
ME7.4.5-EEPROM-95320 options in <3-ECU>-><VOLKSWAGEN>
+ Add BCM2(D70F3380) option in <4-IMMOBILIZER>-><AUDI>
+ Add EWS3-KLINE(0D46J) option in <4-IMMOBILIZER>-><BMW> (Need EWS3 ADAPTER)
+ Add BCM-XEP100(2009--) option in <4-IMMOBILIZER>-><LANDROVER>
+ Add LAGUNA-UCT(2006) option in <4-IMMOBILIZER>-><RENAULT>
+ Add BCM2(D70F3380) option in <4-IMMOBILIZER>-><VOLKSWAGEN>
+ Add BJ40-DASHBORAD,
E150-DASHBORAD(2014),
EX200-BCM(2016) options in <5-DASHBORAD>-><BAICMOTOR>
+ Add EQ-DASHBOARD(2017) option in <5-DASHBORAD>-><CHERY>
+ Add AUTOPLEAD-DASHBOARD(2017) option in <5-DASHBORAD>-><DAYUN>
+ Add IEV-DASHBOARD(2017) option in <5-DASHBORAD>-><JAC>
+ Add BEETLE-DASHBOARD(2005),
BEETLE-DASHBOARD(2010) options in <5-DASHBORAD>-><VOLKSWAGEN>
+ Add REGAL-SRS(2014) option in <7-ARIBAG>-><BUICK>
+ Add GOLF7-SRS option in <7-ARIBAG>-><VOLKSWAGEN>
+ Add A6L-C7-EPB-MODULE option in <8-OTHER>-><AUDI>
+ Add 300C-PDC-MODULE(2007--) option in <8-OTHER>-><CHRYSLER>
+ Add MAGOTAN-LEW-MODULE,
POLO-J393-EEPROM,
TIGUAN-EPB-MODULE options in <8-OTHER>-><VOLKSWAGEN>

[louis21]

Hello friend,
help me please~~
I tried to read and write Renesas V850E2 FG4-L uPD70F3580.
Both tasks were normal and the data were the same when compared.
However, the module could not be recognized when it was checked with diagnostic equipment after it was installed in the vehicle.
When I refer to the data sheet, I can confirm that "system protection functionality (SPF) has been implemented in all V850E2 / Fx4-L devices." The SPF includes a memory protection unit (MPU) and a system register protection (SRP).
Because of this, it seems that even if you write to the module, you can not recognize it. Is there a way to solve this?
Is it because I did not apply the Set Sec button on the upper right after the last write operation? Anyone who knows about this?
help me~

which module?I check if that someone has read it before.and you must have the data right?please upload.

---

Vvdi prog says chip does not support when i try reading MCU 2M42E using MC9S12 relash cable v1 VVDI PROG. what might be the problem?

have you tried juancho18's suggestion?can read out?

hello friend.
i read renault parking sonar module.
it has v850E2 FG4L uPD70F3580
i tested working good.
read d flash. p flash. Opt0
write d flash . p flash . Opt0
working good.
But connecting car , not recognize module
why??????
all working complete.
why not recognize?

Is there another security?
I tried to read the data from the same hardware version of the module and try to replicate it.
However, all of the reading and writing operations were normal, but they did not work when connected to the vehicle. Apparently other security technologies are applied.

which year which car's parking sonar module?please give a picture of the module surface appearance,what's your vvdi prog software version?

[rainbows528]

Hello friend,
help me please~~
I tried to read and write Renesas V850E2 FG4-L uPD70F3580.
Both tasks were normal and the data were the same when compared.
However, the module could not be recognized when it was checked with diagnostic equipment after it was installed in the vehicle.
When I refer to the data sheet, I can confirm that "system protection functionality (SPF) has been implemented in all V850E2 / Fx4-L devices." The SPF includes a memory protection unit (MPU) and a system register protection (SRP).
Because of this, it seems that even if you write to the module, you can not recognize it. Is there a way to solve this?
Is it because I did not apply the Set Sec button on the upper right after the last write operation? Anyone who knows about this?
help me~

which module?I check if that someone has read it before.and you must have the data right?please upload.

---

Vvdi prog says chip does not support when i try reading MCU 2M42E using MC9S12 relash cable v1 VVDI PROG. what might be the problem?

have you tried juancho18's suggestion?can read out?

hello friend.
i read renault parking sonar module.
it has v850E2 FG4L uPD70F3580
i tested working good.
read d flash. p flash. Opt0
write d flash . p flash . Opt0
working good.
But connecting car , not recognize module
why??????
all working complete.
why not recognize?

Is there another security?
I tried to read the data from the same hardware version of the module and try to replicate it.
However, all of the reading and writing operations were normal, but they did not work when connected to the vehicle. Apparently other security technologies are applied.

which year which car's parking sonar module?please give a picture of the module surface appearance,what's your vvdi prog software version?

2017MY renault Koleos2 UPA Parking sonar module.
i read write v850E2 FG4L uPD70F3580
and v850E2 FE4L uPD70F3571
i use vvdi pro 4.6.0
attachment files.
all read write ok. but not recognized in car.
see the attachment.

help me~~~

[louis21]

OK,got it,we analyse it.at the same time,please try other ways that collected.

[rainbows528]

OK,got it,we analyse it.at the same time,please try other ways that collected.

There seems to be something special security system. There seems to be a system registration restriction like ATMEGA's Fuse.
It seems that there is a security other than just doing what you read and write.
Please solve it.

[louis21]

It will take some time to collect the module and test

[MILITANTS]

Hello guys...Is it possible to read the flash from a VAG MED9.1 ECU?

[Giuseppe Mark]

Hello guys...Is it possible to read the flash from a VAG MED9.1 ECU?

it can not do this

[rainbows528]

It will take some time to collect the module and test

dear friend.
renesas v850e2 is some security..
look at this!
beeprog security option.
help me.

[emhtuning]

Sorry if offtopic post , but where can I order this tool from?

it will be really nice if some site are in Europe ,

thanks