[9bar]

I have used the mt401 odb tool to reset mileage ended up with a dead dash, think I need a eeprom dump as I have been told the data is corrupted on this one.


Any advice? Thanks

[levis]

It doesn't turn on at all? open dash and see what eeprom's inside, I can help you

[zgjana]

Hi, as i ordered a mt401 some days ago, and i,m waiting to pickup from the post office , now i find this thread , i,m interested to know what kind of car it was and which year please ? and if it was an original mt401 and which updated version? thanks

[9bar]

Sorry for late reply, @levis

I will open up the dash today and will get back to you.

---

@zgjana I used it on a 2010 Audi A3 black edition.

Hope this helps you.

The item was sold to me to correct mileage as it was showing 999999

Now I'm still stuck with a dead car in garage till it's sorted

[zgjana]

Thanks for replying me, this isue i resolved with digiprog3 version 4.88, at the second try, at the first try my cluster was dead too, have you try this mt401 to other cars? By the way how did you track this a3 cluster? With autodetect or did you selected at the vehichle menu?


Sent from my iPhone using Tapatalk

[9bar]

Thanks for replying me, this isue i resolved with digiprog3 version 4.88, at the second try, at the first try my cluster was dead too, have you try this mt401 to other cars? By the way how did you track this a3 cluster? With autodetect or did you selected at the vehichle menu?


Sent from my iPhone using Tapatalk

I tracked it down using vcds, I ended paying more money for this issue.

I sent it out to a external company which seems to have wiped it clean and now the cluster is detected but is still dead with no immobiliser being detected now.

Not tried this item on anything else as it's been sent back to the place I purchased it from.

[9bar]

It doesn't turn on at all? open dash and see what eeprom's inside, I can help you

Here is the inside of it

Attachments

https://ibb.co/jkig15
https://ibb.co/cPEzok

[33111]

Use xprog for micronas dash in audi

[daniel3219]

Hi everyone on this thread!

I have the EXACT same issue, My dead is dash and immobilizer is cutting in, due to me messing around with SuperVag!.

Has this issue been resolved, and if it has, how!? Do I need new clocks or can I reflash my current ones?

Thanks in advance

---

I have used the mt401 odb tool to reset mileage ended up with a dead dash, think I need a eeprom dump as I have been told the data is corrupted on this one.


Any advice? Thanks

I have this exact fault, by using SuperVag, How did you go about fixing this?

[obdprogwendy]

Thanks for replying me, this isue i resolved with digiprog3 version 4.88, at the second try, at the first try my cluster was dead too, have you try this mt401 to other cars? By the way how did you track this a3 cluster? With autodetect or did you selected at the vehichle menu?


Sent from my iPhone using Tapatalk

I tracked it down using vcds, I ended paying more money for this issue.

I sent it out to a external company which seems to have wiped it clean and now the cluster is detected but is still dead with no immobiliser being detected now.

Not tried this item on anything else as it's been sent back to the place I purchased it from.

Hi，sorry to see this thread since I'm the developer of mt401 .Can you advise more information of your car model and year please ? Did you update the device to the lastest version ? Maybe I can help.