Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Problem with ISTA-D
31-08-2017, 20:39 PM,
Post: #1
|
|||
|
|||
Problem with ISTA-D
Hi @ all,
i have a little problem with the last version. I can only diagnostic e model, f model ista say PAD is not active. What is PAD? big thx for help |
|||
31-08-2017, 21:04 PM,
Post: #2
|
|||
|
|||
RE: Problem with ISTA-D
Use this tool:
http://cartechnology.co.uk/showthread.ph...light=node |
|||
11-10-2017, 17:16 PM,
(This post was last modified: 11-10-2017, 17:17 PM by msp23.)
Post: #3
|
|||
|
|||
RE: Problem with ISTA-D
Hi try everything but the tool doenst help . Can someone help me to slove this problem. It is only F-Models
|
|||
11-10-2017, 19:12 PM,
Post: #4
|
|||
|
|||
RE: Problem with ISTA-D
Make sure "C:\EDIABAS\Bin\EDIABAS.INI" is set to Interface = ENET
Launch "C:\EDIABAS\Hardware\ENET\ZGW_SEARCH.exe" to verify cable and connection are working. |