Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ODIS cannot find/flash retrofitted modules?
27-09-2017, 14:18 PM,
Post: #21
RE: ODIS cannot find/flash retrofitted modules?
Regarding the topic - is it possible to add through ODIS-E new PR number for retrofitted modules?
Have ODIS-E on-line options like ODIS-S? (for example SVM coding)

For example change module 16:
5Q0953549 to 5Q0953549D
Version "D" add new functionality with PR number 2ZD - "Heated leather trimmed multi-function steering wheel with Tiptronic"

Could be used ODIS-E for adding new 2ZD PR number to VW database? Or additional action on "service42" is needed?
Quote this message in a reply
28-09-2017, 05:30 AM,
Post: #22
RE: ODIS cannot find/flash retrofitted modules?
If it allows hw units so yes ,hw units must be the same as flash files.
Quote this message in a reply
28-09-2017, 07:31 AM, (This post was last modified: 28-09-2017, 07:40 AM by apoelistas.)
Post: #23
RE: ODIS cannot find/flash retrofitted modules?
VCP has PR capability but offline. Never used it but sounds interesting. NOT SURE IF YOU CAN USE THIS PR CODE FILE FROM VCP WITH ODIS-S OR ODIS-E TO UPDATE VW AUDI ONLINE DATABASE e.g. PR code to enable the following: keyless entry, TPMS
(Parameters have been activated but not originally offered, and if dealer does a reset these are de-activated again)

Also would be interesting if one could update VW/Audi database with newer offline updated firmware.

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
28-09-2017, 20:29 PM,
Post: #24
RE: ODIS cannot find/flash retrofitted modules?
(28-09-2017, 07:31 AM)apoelistas Wrote:  VCP has PR capability but offline. Never used it but sounds interesting. NOT SURE IF YOU CAN USE THIS PR CODE FILE FROM VCP WITH ODIS-S OR ODIS-E TO UPDATE VW AUDI ONLINE DATABASE e.g. PR code to enable the following: keyless entry, TPMS
(Parameters have been activated but not originally offered, and if dealer does a reset these are de-activated again)

Also would be interesting if one could update VW/Audi database with newer offline updated firmware.
The latest database is online already. There are no flash file database updates for Audi for two months now.
Quote this message in a reply
29-09-2017, 05:06 AM, (This post was last modified: 29-09-2017, 06:04 AM by apoelistas.)
Post: #25
RE: ODIS cannot find/flash retrofitted modules?
(28-09-2017, 20:29 PM)razzo Wrote:  
(28-09-2017, 07:31 AM)apoelistas Wrote:  VCP has PR capability but offline. Never used it but sounds interesting. NOT SURE IF YOU CAN USE THIS PR CODE FILE FROM VCP WITH ODIS-S OR ODIS-E TO UPDATE VW AUDI ONLINE DATABASE e.g. PR code to enable the following: keyless entry, TPMS
(Parameters have been activated but not originally offered, and if dealer does a reset these are de-activated again)

Also would be interesting if one could update VW/Audi database with newer offline updated firmware.
The latest database is online already. There are no flash file database updates for Audi for two months now.

Actually I was more thinking of changing the Audi database PR coding of our car as sold to us. (SVM spec). Say for us it is easy to change the actual parameters and codings of our car in order to enable features (using VCDs, VCP and can-connect). If audi dealer resets SVM to spec we have lost all our codings and parameters (e.g laptimer coding, tpms coding, or keyless entry parameter, bluetooth retrofitted, or door puddle and warning lights retrofitted). I was thinking of changing the SVM spec database in order to retain my changes. is it posssible to change the vw/audi spec database PR coding??

VW/Audi should allow retrofit flexibility and database as sold/spec revision???

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
07-10-2017, 07:25 AM,
Post: #26
RE: ODIS cannot find/flash retrofitted modules?
The "online coding" part of ODIS is NOT intelligent, it only reads the VIN-number and then runs "online coding" = Everything back to stock.
Quote this message in a reply
[+] 2 users say Thank You to Mex165 for this post
08-10-2017, 06:38 AM,
Post: #27
RE: ODIS cannot find/flash retrofitted modules?
SVM you can not change it, just certain accessories offered by the vw dealer
Quote this message in a reply
[+] 2 users say Thank You to onyx4 for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
0Scope ODIS-Service 7.2.1 Postsetup 4220 (test) Tadk 1,065 102,220 1 hour ago
Last Post: dachCAR
  ODIS-Service_update_23_0_1-EU_20240418_Postsetup_230001.105.1350_test Tadk 315 19,739 5 hours ago
Last Post: JoZerByte
ZBentley ODIS Service 11.0.1 + Activations justdiag 110 9,813 8 hours ago
Last Post: Stig33
  Can someone help me flash the parameters of the camera? glljh2016 0 25 23-04-2024, 08:37 AM
Last Post: glljh2016
ZTAudi Audi a7 c8 zFAS 291 flash help tomtomek 8 267 21-04-2024, 19:43 PM
Last Post: audimees
00Windows ODIS-Service 6.2.0 Postsetup 4220 (test) Tadk 187 13,608 21-04-2024, 11:27 AM
Last Post: Tomey
  ODIS engineering passthru install sanil 3 161 17-04-2024, 20:20 PM
Last Post: vagvag
Lamborghini ODIS Service 23.2.2 + Activations justdiag 62 4,648 15-04-2024, 08:41 AM
Last Post: justdiag
0Scope ODIS-Engineering 12.2 Postsetup 1060 (test) Tadk 263 34,436 14-04-2024, 07:56 AM
Last Post: RitterDussel
ZVW Odis Engineering 14 + Activations fantomel 346 40,040 13-04-2024, 23:40 PM
Last Post: ch0ngin

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content