Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
SID803 configuration problem
08-09-2017, 12:10 PM,
Post: #1
|
|||
|
|||
SID803 configuration problem
I have problem with sid803 and configuration.
When i writhe virgin file and pairing ecu & bsi car start,but i have dtc Configuration error and car is in limp mode. When i try manual configuration i have error "Programing failed" Is possible make virgin with configuration in eeprom and how to solve this problem ? |
|||
08-09-2017, 18:07 PM,
Post: #2
|
|||
|
|||
RE: SID803 configuration problem
HI pls can you tell mi what is the problem with this car ?
you have to chaenge the ecu 1/ if you have the old just swap the eprom 2/ if you dont have the old one give mi the org pin good luck |
|||
Reputation: +1 - ROD-BENDERS [+1] | |||
08-09-2017, 20:07 PM,
Post: #3
|
|||
|
|||
RE: SID803 configuration problem
|
|||
08-09-2017, 21:24 PM,
Post: #4
|
|||
|
|||
RE: SID803 configuration problem
HI GIVE THIS A GO
GOOD LUCK |