[szabx]

Hi All,

I used Rheingold 4.07.13 Standalone / SDP 4.07.11 / ISTA-P 3.62.3.001 with E-NET cable. Works well, read fault code, I can used the service function. But when I'd like my BMW F11 software update (vehicle management -> software update) get a message:

A fault occurred during calculation of the measures plan. The required programming is therefore not available.
Please contact Technical Support.

Can somebody help me?

[mjuhl2003]

I think you have wrong settings in your registry

have you just copied the installation with SDP data or did you use the launcher to unpack the data?

you need to look in your registry. it should look something like this

[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BMWGroup\ISPI\ISTA]
"InstallLocation"="F:\\Rheingold"
"MainProductVersion"="4.07"
"DataVersion"="4.07.12"
"DataVersion_en-GB"="4.07.12"
"ProductVersion"="4.07.13.20911"
"SWIData"="4.07.11"

[inspi1981]

Programming not possible via ENET, You need ICOM with ISTA-D. With ISTA-P and Esys You can use ENET

[szabx]

Thanks, the quickly answer!