Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Need help with Toyota Yaris hybrid 2013 P0A0F
16-09-2017, 16:09 PM,
Post: #1
VToyota  Need help with Toyota Yaris hybrid 2013 P0A0F
Dear,
I need help with following fault code:

Toyota Yaris hybrid 2013
P0A0F
Engine starts and run then cut off.

Please provide me with the repair procedures.

Best Regards,
Waliduk
Quote this message in a reply
16-09-2017, 18:29 PM, (This post was last modified: 16-09-2017, 18:30 PM by IM6.)
Post: #2
RE: Need help with Toyota Yaris hybrid 2013 P0A0F
(16-09-2017, 16:09 PM)Waliduk Wrote:  Dear,
I need help with following fault code:

Toyota Yaris hybrid 2013
P0A0F
Engine starts and run then cut off.

Please provide me with the repair procedures.

Best Regards,
Waliduk

Witch One

P0A0F-204
P0A0F-205
P0A0F-206
P0A0F-238
P0A0F-524
P0A0F-525

HYBRID / BATTERY CONTROL: HYBRID CONTROL SYSTEM: P0A0F-204, P0A0F-205, P0A0F-206, P0A0F-524, P0A0F-525; Engine Failed to Start
P0A0F-204 - Engine Failed to Start
P0A0F-205 - Engine Failed to Start
P0A0F-206 - Engine Failed to Start
P0A0F-524 - Engine Failed to Start
P0A0F-525 - Engine Failed to Start

DESCRIPTION

If an engine malfunction occurs, an engine malfunction signal is sent from the ECM to the power management control ECU (HV CPU). When the power management control ECU (HV CPU) receives this signal, it sets a DTC and performs fail-safe control.


image


INSPECTION PROCEDURE

PROCEDURE

1. CHECK DTC OUTPUT (ENGINE AND ECT)

(a)Connect the Tech-stream to the DLC3.

(b)Turn the power switch on (IG).

©Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.

(d)Check if DTCs are output.

Result:


image


HINT
If P0A0F-204, 205, 206, 524, or 525 is output even though the ECM has not detected a malfunction, there is a malfunction in the power management control ECU.

mailTurn the power switch off.

B -- GO TO DTC CHART (SFI SYSTEM) See: A L L Diagnostic Trouble Codes ( DTC ) > Diagnostic Trouble Code Descriptions > Diagnostic Trouble Code Chart

A -- REPLACE POWER MANAGEMENT CONTROL ECU See: Power Distribution Module > Removal and Replacement > Components
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
1Bosch Esitronic 2013/3 full, include all Iso thepito2 0 108 13-02-2024, 17:07 PM
Last Post: thepito2
ZVW Solved ✔ BRAKE LIGHTS turn on permanently golf 6 2013 diago2001 1 90 13-02-2024, 09:25 AM
Last Post: diago2001
  Toyota AYGO KGB10 2005 workshop manual rocris 1 520 23-01-2024, 08:01 AM
Last Post: rocris
VToyota Toyota MAP sensor Liniarisation banza 0 95 15-01-2024, 20:48 PM
Last Post: banza
VToyota Toyota Highlander 2015 Repair manual Arod1987 2 525 26-12-2023, 10:48 AM
Last Post: ToolSet
ZTAudi Audi Q5 2013 wiring diagram file AlexM3F80 2 541 13-09-2023, 06:31 AM
Last Post: AlexM3F80
VScion Dead Link  Toyota, Lexus and Honda workshop manuals ocostel 1 2,536 24-08-2023, 13:22 PM
Last Post: Dišovas
LFord FORD ESCAPE ZG FORD KUGA MK2 TF 2013- WORKSHOP m1t1k1 0 308 24-08-2023, 11:03 AM
Last Post: m1t1k1
  e90 E92 E91 Bentley Service manual 2006-2013 Jordiano 0 410 08-06-2023, 09:16 AM
Last Post: Jordiano
  Evoque 2013 OBD pinout dule-p 1 378 23-05-2023, 19:17 PM
Last Post: OBDXCAR

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content