Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Problem with Ista P + ICOM A2
17-09-2017, 17:03 PM,
(This post was last modified: 30-09-2017, 18:15 PM by Clusters.)
Post: #1
|
|||
|
|||
Problem with Ista P + ICOM A2
Hello! Ista P 3.62.2.003 when started with Loader V6.3Lite + ICOM A2, the clone starts searching for the VIN number and then shows the voltage below 12V when the power supply is connected or the car is running. Even when it finds Vin it displays the message that the interface is corrupt and can not make connections. ISTA+ 4.06.31, INPA and NCS work fine. What could be the problem? Thanks in advance for all the hints.
|
|||
17-09-2017, 20:43 PM,
Post: #2
|
|||
|
|||
RE: Problem with Ista P + ICOM A2
Update firmware on your Icom
Please, Press the Buttons and if you feel that this post helped you!
|
|||
18-09-2017, 04:49 AM,
Post: #3
|
|||
|
|||
RE: Problem with Ista P + ICOM A2
Updated to 03-15-00 and the problem is still the same
|
|||
18-09-2017, 07:27 AM,
Post: #4
|
|||
|
|||
RE: Problem with Ista P + ICOM A2
Buy original ICOM or better clone.
Gesendet von meinem HTC 10 mit Tapatalk NBT EVO Apple CarPlay Full Screen, Navigation, Video in Motion, SSH, CP
EntryNav EVO Apple CarPlay, Navigation, CP, SSH, full FSC Pack BMW FSC Retrofit CIC/NBT/EVO 8HP ISN Reset F Series Remote Remote VAG Navigation Update, Apple CarPlay and Android Auto Programming and Coding |
|||
30-09-2017, 17:45 PM,
Post: #5
|
|||
|
|||
RE: Problem with Ista P + ICOM A2
Problem solved. When antivirus is turned off everything works as it should
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content