[Bimmer540]

How to turn off RDC from E39 525i 2001

[oceandiver86]

Remove code from ZCS and recode car

[emerer]

Adapt ZCS

Code:

0265 00000000 0000000000002000 0000000000 1 RDKS //Reifendruckkontrollsystem bzw. RDW (Reifendruckwarnung)

and VO Code KMB and LCM.

[diagnosiks]

How to turn off RDC from E39 525i 2001

If you have BMW Scanner V1.4, you can turn off the RDC Fault message in the OBC (Check Controle) of the IKE.
So everything looks like it works correctly, even the calibration button, but there isn´t this annoying CheckControle message anymore .
I did this twice and for me it´s the quickest way to solve this.
BR

[Bimmer540]

This is what i see:




And i tride this with Ncsexpert and no result.

[Bimmer540]

Adapt ZCS

Code:

0265 00000000 0000000000002000 0000000000 1 RDKS //Reifendruckkontrollsystem bzw. RDW (Reifendruckwarnung)

and VO Code KMB and LCM.

Can you explain me how to.

[oceandiver86]

Read out your actual ZCS with NCS (GM/ SA/ VN) and post here so we can remove the SA from it.

then write the modified ZCS with NCS and recode the car

[Bimmer540]

Read out your actual ZCS with NCS (GM/ SA/ VN) and post here so we can remove the SA from it.

then write the modified ZCS with NCS and recode the car

Can I follow this procedure.

[oceandiver86]

Yes, looks ok.
just also recode the car/ affected modules with the modified ZCS as well

[diagnosiks]

This is what i see:




And i tride this with Ncsexpert and no result.

Hy,
open BMW-Scanner
go to LCM
go to Coding Data
goto Check / Control messages

here you can deactivate the RDC Fault message in IKE

BR