[tomay3000]

I have tried everything to activate PSA DiagBox 7.01, and I always end with the famous "failure of the activation (error 0)"

What are the possible common causes that leads to this f*c*i*g famous "failure of the activation (error 0)"

Help me please

Thank you for your understanding.

[admiral]

I have tried everything to activate PSA DiagBox 7.01, and I always end with the famous "failure of the activation (error 0)"

What are the possible common causes that leads to this f*c*i*g famous "failure of the activation (error 0)"

Help me please

Thank you for your understanding.

Unninstall everythink,,use DB cleaner posted by me,,,,,,,

[tomay3000]

Unninstall everythink,,use DB cleaner posted by me,,,,,,,

at least post a download link of your DB cleaner, & I will give a try.

Thank you.

[barbo]

Did anyone try to run diagbox on virtual machine. I install on psyhical and works OK but on virtual i get failure of the activation (error 0)

[lurchy666]

When I got activation error 0 it was because my languge settings in windows was set to uk not English us

[crefin]

Install all drivers to your laptop , especialy lan and wifi,
restart pc
install again diagbox ( without internet connected )
and then will be good no error 0

[Geri]

When I got activation error 0 it was because my languge settings in windows was set to uk not English us

Error = 0 > MAC-adress network card not found. The network card must be activated to identify the computer.

[mehdi_gsm]

Hello
you must close the application and open it again to avoid the error thank you 0

[mattydr67]

Unninstall everythink,,use DB cleaner posted by me,,,,,,,

at least post a download link of your DB cleaner, & I will give a try.

Thank you.

Well
Here it is mate
http://garage-automotive.com/showthread....ht=cleaner
Good luck

[sbrenda]

I running on vm.
The problem is in the vm config.
Work only if hdd is set to "ide", if "scsi" gave error 0
Good luck!