PSA DiagBox 7.01 - failure of the activation (error 0)

Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Threaded Mode | Linear Mode

PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad

04-08-2015, 08:51 AM,

Post: #16

rogercross
Unregistered

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad

Hi guys hope someone can help I have pp2000 installed first time tried to connect it to the car to automatically get the cars information it finds the vin number but when it goes to the next step search for the cars data it fails and says automatic detection of the vehicle interrupted and stops so when I manually put in the vin number it go to the diagbox/pp2000 screen I press on either of them it says turn on the key it the shows the vin number the says ecu not replied press the tick the next screen says it is not possible to run pp2000for the following reason
pp interface is not connected to the pc
pp interface is being used by another app
any ideas please I have installed twice first time with wifi turned on second time it was turned off except when validation of the product also should it take over 30mins just to close the app down I am a bit of a novice at pc stuff any help would be great roger

« Next Oldest | Next Newest »

Messages In This Thread

PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by tomay3000 - 01-03-2014, 20:13 PM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by admiral - 01-03-2014, 21:59 PM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by tomay3000 - 01-03-2014, 23:39 PM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by mattydr67 - 03-04-2014, 15:01 PM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by sbrenda - 14-06-2014, 19:48 PM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by FRN69 - 25-07-2014, 10:46 AM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by no1vic - 02-04-2017, 19:16 PM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by barbo - 07-03-2014, 07:47 AM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by lurchy666 - 12-03-2014, 10:47 AM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by Geri - 13-03-2014, 08:15 AM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by mikajna - 13-07-2015, 14:25 PM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by crefin - 12-03-2014, 20:57 PM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by mehdi_gsm - 03-04-2014, 14:17 PM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by garage_neo - 19-06-2014, 21:12 PM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by obdstart - 20-06-2014, 15:04 PM

PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by shayeight - 16-08-2014, 02:17 AM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by rogercross - 04-08-2015, 08:51 AM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by rogerbsp - 20-10-2015, 00:55 AM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by Simple - 20-10-2015, 06:14 AM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by rogerbsp - 20-10-2015, 22:25 PM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by Simple - 21-10-2015, 03:17 AM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by uh60 - 25-11-2015, 17:09 PM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by edwindtf - 11-12-2015, 12:50 PM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by faun - 13-03-2016, 18:15 PM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by Simple - 13-03-2016, 20:47 PM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by faun - 15-03-2016, 20:16 PM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by Simple - 15-03-2016, 21:10 PM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by faun - 17-03-2016, 07:08 AM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by Simple - 17-03-2016, 09:01 AM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by obdstart - 17-03-2016, 19:36 PM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by Simple - 17-03-2016, 20:10 PM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by faun - 18-03-2016, 13:13 PM

RE: PSA DiagBox 7.01 - failure of the activation (error 0) - I am going to be mad - by P2XA - 19-12-2016, 10:40 AM

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	diagbox 9.173	sharawi	2	329	21-04-2024, 14:31 PM Last Post: justdiag
	PSA Diagbox VCI Interfaces	alexturbo	18	7,312	27-12-2023, 21:45 PM Last Post: apol
	DIAGBOX 2021 9.85 FULL INSTALATION	akli	6	3,044	26-12-2023, 20:21 PM Last Post: Le-Mans
	DIAGBOX online	walczaklu	10	8,889	03-12-2023, 12:57 PM Last Post: mattydr67
	DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet)	Simple	33	36,040	22-11-2023, 06:16 AM Last Post: Jeppo
	Diagbox 9.129 activation request	dadoa4	4	2,549	09-11-2023, 09:59 AM Last Post: bovhec
	diagbox 9.150	stasi	5	2,497	16-09-2023, 19:41 PM Last Post: stasi
	DiagBox Language Change	Simple	16	17,585	14-09-2023, 10:01 AM Last Post: żarówka
	DIAGBOX help needed installing	mars2moon	4	1,129	23-07-2023, 18:45 PM Last Post: J415UNNY
	Diagbox 9.91 VmWare	gabi2008	6	4,401	23-07-2023, 18:42 PM Last Post: J415UNNY

Forum Jump:

Users browsing this thread:
1 Guest(s)

Return to Top Return to Content

Contact Us