[raduandrei82]

As the title says, after reflash to C1A, i checked Vehicle Information, and the triangle menu where you can see faults is gone.

Not sure which setting enables this, before the reflash i had it there. Should i VO code it again after reflash, because i didn't do it.

Thanks

[bmw335coding]

As the title says, after reflash to C1A, i checked Vehicle Information, and the triangle menu where you can see faults is gone.

Not sure which setting enables this, before the reflash i had it there. Should i VO code it again after reflash, because i didn't do it.

Thanks

VO code the CIC.

[vagrom]

Hello good, this problem I had in my cic and yellow triangle without information, which I did not need to update anything, it is deactivated by removing from the KOMBI the CBS warning the micro filter particles, if you disregard that warning in the KOMBI removes said triangle , I do not know if it's the one you mean, but I had a triangle check in the car and I had no information.

---

I'm going to read my kombi and put the section to disable it and publish it for the one who has the same problem, but it's as simple as I did, looking for the CBS I had in the cic and the one that did not appear and had it activated turn it off and goodbye triangle, all this is in the KOMBI in the section of check CBS

[raduandrei82]

I did not touch any coding except reflashing the CIC from C16 to C1A.

But after reflash i did not VO code again the CIC, maybe this is the issue.

I think you misunderstood my problem. The Kombi shows in the small screen the triangle for errors, but the CIC icon disappeared. I only the Oil level menu, TPMS and service check menu.

I'll recode the CIC and report back.

[SweetBMW]

After flashing you need code.

[raduandrei82]

Done, VO Coded with empty MAN file and everything is back to normal .

Thanks guys