Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
GTS DCT flash on a F80 M3?
11-10-2017, 03:27 AM,
Post: #1
|
|||
|
|||
GTS DCT flash on a F80 M3?
Does anyone know how to flash GTS DCT software in a F80 M3? Thanks
|
|||
11-10-2017, 05:24 AM,
Post: #2
|
|||
|
|||
RE: GTS DCT flash on a F80 M3?
Change Chassis and Typecode in FA, run tal-calculation, flash EGS.
|
|||
12-10-2017, 05:22 AM,
Post: #3
|
|||
|
|||
RE: GTS DCT flash on a F80 M3?
|
|||
19-11-2018, 15:52 PM,
Post: #4
|
|||
|
|||
RE: GTS DCT flash on a F80 M3?
(12-10-2017, 05:22 AM)dazuc Wrote: Edit the FA, change the Typschlüssel to 4S93 (or 4S91 if euro model). Do we only check the boxes for "swDeploy" and "cdDeploy" for the EGS? No need to flash the bootloader or anything else? Also, should I use an ICOM cable or just stick to an ENET, I got both. Thanks, Peter |
|||
19-11-2018, 22:15 PM,
Post: #5
|
|||
|
|||
RE: GTS DCT flash on a F80 M3?
Flash also rear differ, egs and eps. F80 will be different car
|
|||
20-11-2018, 06:08 AM,
Post: #6
|
|||
|
|||
RE: GTS DCT flash on a F80 M3?
(19-11-2018, 15:52 PM)PeterY Wrote: Do we only check the boxes for "swDeploy" and "cdDeploy" for the EGS? No need to flash the bootloader or anything else? blFlash: Flashes new Bootloader (BTLD) swDeploy: Flashes new Software (SWFL) cdDeploy: Encodes (e.g. VO Codes ECU, CAFD) ibaDeploy: used to update the Owners manual for HU (IBAD). EGS only needs swfl & btld; there is no CAFD. ENET is fine. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content